On 02/28/12 10:10, Stefan Priebe - Profihost AG wrote:
Hi list,
i've configured a raid1 and i'm trying to install grub on it. But it
doesn't work.
~# grub-mkdevicemap -n
~# cat /boot/grub/device.map
(hd0) /dev/disk/by-id/ata-INTEL_SSDSA2CW160G3_CVPR14530C6J160DGN
(hd1) /dev/disk/by-id/ata-INTEL_SSDSA2CW160G3_CVPR145101F9160DGN
~# grub-install /dev/md127
error: found two disks with the index 0 for RAID md/raidone.
error: superfluous RAID member (2 found).
error: found two disks with the index 0 for RAID md/raidone.
error: superfluous RAID member (2 found).
error: found two disks with the index 0 for RAID md/raidone.
error: superfluous RAID member (2 found).
error: found two disks with the index 0 for RAID md/raidone.
error: superfluous RAID member (2 found).
error: found two disks with the index 0 for RAID md/raidone.
error: superfluous RAID member (2 found).
/usr/sbin/grub-install: line 661: 20158 Segmentation fault
"$grub_setup" ${allow_floppy} ${setup_verbose} ${setup_force}
--directory="${grubdir}" --device-map="${device_map}" "${install_device}"
When i then add /dev/md127 to my device.map i got this:
~# grub-install /dev/md127
error: found two disks with the index 0 for RAID md/raidone.
error: superfluous RAID member (2 found).
error: found two disks with the index 0 for RAID md/raidone.
error: superfluous RAID member (2 found).
error: found two disks with the index 0 for RAID md/raidone.
error: superfluous RAID member (2 found).
error: found two disks with the index 0 for RAID md/raidone.
error: superfluous RAID member (2 found).
error: found two disks with the index 0 for RAID md/raidone.
error: superfluous RAID member (2 found).
error: found two disks with the index 0 for RAID md/raidone.
error: superfluous RAID member (2 found).
Installation finished. No error reported.
But the device still does not boot. Installing grub to sda / sdb does
not work either as they do not contain any partition table. What's wrong
here?
Greets
Stefan
Raid details:
~# parted
Model: Linux Software RAID Array (md)
Disk /dev/md127: 160GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 2097kB 1049kB GRUB_BOOT bios_grub
2 2097kB 99,6MB 97,5MB ext2 BOOT
3 99,6MB 157GB 157GB xfs ROOT
4 157GB 160GB 3056MB linux-swap(v1) SWAP
I am not sure whether this is the reason, but you have disks with gpt
partition tables, while it looks like you are still using grub1? I
didn't think grub1 was able to handle gpt.
Cheers,
Jes