Hello list,
I recently had a RAID6 lose two drives in quick succession, with one
spare already in place. The rebuild started fine with the spare, but
now that I've replaced the failed disks, should I expect the current
rebuild to finish, then rebuild on another spare? Or do I need to do
something special to kick off the rebuilding on another spare? I tried
looking for the answer using various web search permutations with no
success.
My mdadm and uname output is below. (I did not remember to use a newer
mdadm to add the spares, so I originally used 2.6.9, but I do have 3.2.3
available on this box.) Thanks for any pointers.
--keith
# uname -a
Linux xxxxxxxxxx 2.6.39-4.1.el5.elrepo #1 SMP PREEMPT Wed Jan 18 13:16:25 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
# mdadm -D /dev/md0
/dev/md0:
Version : 1.01
Creation Time : Thu Sep 29 21:26:35 2011
Raid Level : raid6
Array Size : 15624911360 (14901.08 GiB 15999.91 GB)
Used Dev Size : 1953113920 (1862.63 GiB 1999.99 GB)
Raid Devices : 10
Total Devices : 12
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Mon Jan 30 22:07:26 2012
State : clean, degraded, recovering
Active Devices : 8
Working Devices : 12
Failed Devices : 0
Spare Devices : 4
Chunk Size : 64K
Rebuild Status : 18% complete
Name : 0
UUID : 24363b01:90deb9b5:4b51e5df:68b8b6ea
Events : 164419
Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sdb1
13 8 33 1 active sync /dev/sdc1
11 8 145 2 active sync /dev/sdj1
12 8 161 3 active sync /dev/sdk1
4 8 65 4 active sync /dev/sde1
9 8 113 5 active sync /dev/sdh1
10 8 81 6 active sync /dev/sdf1
3 8 49 7 spare rebuilding /dev/sdd1
8 8 129 8 active sync /dev/sdi1
9 0 0 9 removed
14 8 177 - spare /dev/sdl1
15 8 209 - spare /dev/sdn1
16 8 225 - spare /dev/sdo1
--
kkeller@wombat.san-francisco.ca.us
(try just my userid to email me)
AOLSFAQ=http://www.therockgarden.ca/aolsfaq.txt
see X- headers for PGP signature information