Re: Device utilization with RAID-1

Started by Harald Nikolisin on Aug 16, 2011

open the first message on its own page

Message details and related content
well, I have only 2 hard drives and no space for more..

Am 16.08.2011 03:29, schrieb Roberto Spadim:
try raid10 far layout

2011/8/15 Harald Nikolisin <hochglanz@gmail.com
<mailto:hochglanz@gmail.com>>

    Since a long time I'm unhappy with the performance of my RAID-1 system.
    Investigation with atop and iostat unveils that the disk utilization is
    always on a certain level although nothing happens on the system. In the
    case of reading or writing files the utilization boosts always to 100%
    for a long time. Very ugly examples are "Firefox starting" or "zypper
    updates".
    That is snapshot of the output of iostat:


    Device:         rrqm/s   wrqm/s     r/s     w/s   rsec/s   wsec/s
    avgrq-sz avgqu-sz   await  svctm  %util
    sda               0,00     0,00    0,00    7,33     0,00    43,33
    5,91     0,33   43,18  33,32  24,43
    sdb               0,00     0,00    0,00    7,33     0,00    43,33
    5,91     0,35   45,59  39,73  29,13
    md0               0,00     0,00    0,00    0,67     0,00     5,33
    8,00     0,00    0,00   0,00   0,00
    md1               0,00     0,00    0,00    0,33     0,00     5,33
    16,00     0,00    0,00   0,00   0,00
    md2               0,00     0,00    0,00    0,33     0,00     1,00
    3,00     0,00    0,00   0,00   0,00
    md3               0,00     0,00    0,00    0,00     0,00     0,00
    0,00     0,00    0,00   0,00   0,00
    md4               0,00     0,00    0,00    0,00     0,00     0,00
    0,00     0,00    0,00   0,00   0,00
    md5               0,00     0,00    0,00    0,33     0,00     0,67
    2,00     0,00    0,00   0,00   0,00

    I checked with mdadm if a resync happens or so, but this is not the
    case. The state says "active" on all RAID devices - btw. what is the
    difference to "clean" ?

    thanks for any hints,
     harald
    --
    To unsubscribe from this list: send the line "unsubscribe linux-raid" in
    the body of a message to majordomo@vger.kernel.org
    <mailto:majordomo@vger.kernel.org>
    More majordomo info at  http://vger.kernel.org/majordomo-info.html




-- 
Roberto Spadim
Spadim Technology / SPAEmpresarial
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help