Re: Device utilization with RAID-1
From: Harald Nikolisin <hidden>
Date: 2011-08-16 17:25:13
well, I have only 2 hard drives and no space for more.. Am 16.08.2011 03:29, schrieb Roberto Spadim:
try raid10 far layout
2011/8/15 Harald Nikolisin <hochglanz@gmail.com
<mailto:hochglanz@gmail.com>>
Since a long time I'm unhappy with the performance of my RAID-1 system.
Investigation with atop and iostat unveils that the disk utilization is
always on a certain level although nothing happens on the system. In the
case of reading or writing files the utilization boosts always to 100%
for a long time. Very ugly examples are "Firefox starting" or "zypper
updates".
That is snapshot of the output of iostat:
Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s
avgrq-sz avgqu-sz await svctm %util
sda 0,00 0,00 0,00 7,33 0,00 43,33
5,91 0,33 43,18 33,32 24,43
sdb 0,00 0,00 0,00 7,33 0,00 43,33
5,91 0,35 45,59 39,73 29,13
md0 0,00 0,00 0,00 0,67 0,00 5,33
8,00 0,00 0,00 0,00 0,00
md1 0,00 0,00 0,00 0,33 0,00 5,33
16,00 0,00 0,00 0,00 0,00
md2 0,00 0,00 0,00 0,33 0,00 1,00
3,00 0,00 0,00 0,00 0,00
md3 0,00 0,00 0,00 0,00 0,00 0,00
0,00 0,00 0,00 0,00 0,00
md4 0,00 0,00 0,00 0,00 0,00 0,00
0,00 0,00 0,00 0,00 0,00
md5 0,00 0,00 0,00 0,33 0,00 0,67
2,00 0,00 0,00 0,00 0,00
I checked with mdadm if a resync happens or so, but this is not the
case. The state says "active" on all RAID devices - btw. what is the
difference to "clean" ?
thanks for any hints,
harald
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
<mailto:majordomo@vger.kernel.org>
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Roberto Spadim
Spadim Technology / SPAEmpresarial