Corrupted RAID 50 (aparently?) array. Help needed.

Started by unknown sender on Feb 28, 2008

open the first message on its own page

Message details and related content
Hi list,

Hope someone can give me the right direction on how to resolve this.

I have 12 hard drives with RAID software. (250 GB each disk) I just know it was a 2 TB array. The old operating system which supported the array is no longer online. (just in case someone asks me to check the mdadm.conf file)

From what I can see with mdadm,is that there are 2 x RAID5 arrays of 990.72 GB each. (2 TB the whole array). So I believed that there is a RAID0 between both RAID5 arrays. Right? (RAID 50) The first RAID5 group is composed by 5 discs, all of them active. Here is the post: (all /dev/sdb4 /dev/sdc4 /dev/sdd4 /dev/sde4 /dev/sdf4 are similar and have the same UUID)

# mdadm --examine /dev/sdb4

----------------------------
/dev/sdb4:
          Magic : a92b4efc
        Version : 00.91.00
           UUID : 48b86fc7:adbd7bbe:df7c7359:36df38af
  Creation Time : Tue Apr 24 18:14:28 2007
     Raid Level : raid5
  Used Dev Size : 241873792 (230.67 GiB 247.68 GB)
     Array Size : 967495168 (922.68 GiB 990.72 GB)
   Raid Devices : 5
  Total Devices : 5
Preferred Minor : 0

  Reshape pos'n : 0
      New Level : raid0
     New Layout : left-asymmetric
  New Chunksize : 0

    Update Time : Mon Nov 29 21:01:33 1999
          State : clean
 Active Devices : 5
Working Devices : 5
 Failed Devices : 0
  Spare Devices : 0
       Checksum : 42da3120 - correct
         Events : 0.61

         Layout : left-symmetric
     Chunk Size : 64K

      Number   Major   Minor   RaidDevice State
this     0       3        4        0      active sync

   0     0       3        4        0      active sync
   1     1      22        4        1      active sync
   2     2      33        4        2      active sync
   3     3      34        4        3      active sync
   4     4      56        4        4      active sync
---------------------

But If I try to assemble this 1st RAID5 array:

# mdadm --assemble /dev/md0 /dev/sdb4 /dev/sdc4 /dev/sdd4 /dev/sde4 /dev/sdf4
mdadm: Failed to restore critical section for reshape, sorry.

Is not possible. I also try the build option:

# mdadm --build /dev/md0 -l5 -n5 --assume-clean /dev/sdb4 /dev/sdc4 /dev/sdd4 /dev/sde4 /dev/sdf4
mdadm: Raid level 5 not permitted with --build.

On the other hand there is the second RAID5 group which outputs the following:

------------------
# mdadm --examine /dev/sdg4 
/dev/sdg4:
          Magic : a92b4efc
        Version : 00.91.00
           UUID : 384bd728:158c759c:e9be7911:01187b1f
  Creation Time : Tue Apr 24 18:14:48 2007
     Raid Level : raid5
  Used Dev Size : 241873792 (230.67 GiB 247.68 GB)
     Array Size : 967495168 (922.68 GiB 990.72 GB)
   Raid Devices : 5
  Total Devices : 6
Preferred Minor : 1

  Reshape pos'n : 0
      New Level : raid0
     New Layout : left-asymmetric
  New Chunksize : 0

    Update Time : Mon Nov 29 21:01:36 1999
          State : active
 Active Devices : 4
Working Devices : 6
 Failed Devices : 0
  Spare Devices : 2
       Checksum : 6eb7dc84 - correct
         Events : 0.65

         Layout : left-symmetric
     Chunk Size : 64K

      Number   Major   Minor   RaidDevice State
this     1      89        4        1      active sync

   0     0       0        0        0      faulty removed
   1     1      89        4        1      active sync
   2     2      90        4        2      active sync
   3     3      91        4        3      active sync
   4     4     120        4        4      active sync
   5     5     121        4        5      spare
   6     6      88        4        6      spare
------------------------------------

The 2nd RAID5 group was composed by 7 disks (I believed, as shown above). 1 disks is faulty and 2 disks are spare. But even though with the remaining 4 disks I could try to assemble this RAID5, but I have the same result as with the 1st RAID5. (mdadm: Failed to restore critical section for reshape, sorry.)

Do you have any idea on how to re-assemble this RAID 50 array ?

Thanks for any advice & help.

Nicolas

PS:

# mdadm -V
mdadm - v2.6 - 21 December 2006

Linux lab-suse 2.6.16.46-0.12-smp #1 SMP Thu May 17 14:00:09 UTC 2007 x86_64 x86_64 x86_64 GNU/Linux

--
This message was sent on behalf of mella.nicolas@gmail.com at openSubscriber.com
http://www.opensubscriber.com/messages/linux-raid@vger.kernel.org/topic.html
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help