Jeff Garzik wrote:

Neil Brown wrote:

quoted

As for where the metadata "should" be placed, it is interesting to
observe that the SNIA's "DDFv1.2" puts it at the end of the device.
And as DDF is an industry standard sponsored by multiple companies it
must be ......
Sorry.  I had intended to say "correct", but when it came to it, my
fingers refused to type that word in that context.

quoted

For the record, I have no intention of deprecating any of the metadata
formats, not even 0.90.

strongly agreed

I didn't get a reply to my suggestion of separating the data and location...

ie not talking about superblock versions 0.9, 1.0, 1.1, 1.2 etc but a data
format (0.9 vs 1.0) and a location (end,start,offset4k)?

This would certainly make things a lot clearer to new (and old!) users:

mdadm --create /dev/md0 --metadata 1.0 --meta-location offset4k
or
mdadm --create /dev/md0 --metadata 1.0 --meta-location start
or
mdadm --create /dev/md0 --metadata 1.0 --meta-location end

resulting in:
mdadm --detail /dev/md0

/dev/md0:
        Version : 01.0
  Metadata-locn : End-of-device
  Creation Time : Fri Aug  4 23:05:02 2006
     Raid Level : raid0

You provide rational defaults for mortals and this approach allows people like
Doug to do wacky HA things explicitly.

I'm not sure you need any changes to the kernel code - probably just the docs
and mdadm.

quoted

It is conceivable that I could change the default, though that would
require a decision as to what the new default would be.  I think it
would have to be 1.0 or it would cause too much confusion.

A newer default would be nice.

I also suspect that a *lot* of people will assume that the highest superblock
version is the best and should be used for new installs etc.

So if you make 1.0 the default then how many users will try 'the bleeding edge'
and use 1.2? So then you have 1.3 which is the same as 1.0? Hmmmm? So to quote
from an old Soap: "Confused, you  will be..."

David