Re: Software RAID when it works and when it doesn't

Started by Alberto Alonso on Oct 14, 2007

open the first message on its own page

Message details and related content
On Sun, 2007-10-14 at 10:21 -0600, Maurice Hilarius wrote:
Alberto Alonso wrote: 
quoted
  
PATA (IDE) with 
Master and Slave drives is a "bad idea" as, when one drive fails, the
other of the Master & Slave pair often is no longer usable.
On discrete interfaces, with all drives configured as Master (single)
 it is more tolerant.
Before SATA became the de-facto we used promise PCI boards on top
of the built in channels. As you mentioned, a single drive per
channel is a must. We only had small servers with up to 6 PATA
drives.

This was proved to be really reliable and handled all disk failures
without bringing the servers down.

What I am trying to determine in these posts is a combination of
hardware and software that will make software RAID a reliable solution
when disks fail.
-- 
With our best regards,

Maurice W. Hilarius         Telephone: 01-780-456-9771
Hard Data Ltd.                FAX:          01-780-456-9772
11060 - 166 Avenue         email:maurice@harddata.com
Edmonton, AB, Canada         http://www.harddata.com/
     T5X 1Y3

Thanks,

Alberto
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help