On Sun, 2007-10-14 at 10:21 -0600, Maurice Hilarius wrote:
Alberto Alonso wrote:
quoted
PATA (IDE) with
Master and Slave drives is a "bad idea" as, when one drive fails, the
other of the Master & Slave pair often is no longer usable.
On discrete interfaces, with all drives configured as Master (single)
it is more tolerant.
Before SATA became the de-facto we used promise PCI boards on top
of the built in channels. As you mentioned, a single drive per
channel is a must. We only had small servers with up to 6 PATA
drives.
This was proved to be really reliable and handled all disk failures
without bringing the servers down.
What I am trying to determine in these posts is a combination of
hardware and software that will make software RAID a reliable solution
when disks fail.
--
With our best regards,
Maurice W. Hilarius Telephone: 01-780-456-9771
Hard Data Ltd. FAX: 01-780-456-9772
11060 - 166 Avenue email:maurice@harddata.com
Edmonton, AB, Canada http://www.harddata.com/
T5X 1Y3
Thanks,
Alberto