Re: raid6 array , part id 'fd' not assembling at boot .

Started by Neil Brown on Mar 17, 2007

open the first message on its own page

Message details and related content
On Friday March 16, babydr@baby-dragons.com wrote:
 	Hello All ,  I am having a dickens of a time with preparing this system 
to replace my present one .
 	I created a raid6 array over 6 147GB scsi drives .
 	steps I followed were .

 	fdisk /dev/sd[c-h] ( one at a time of course )
 	  created a partition starting at cyl 2 & -10 Cyls from the end of the drive .
 	  typed the partion FD
 	  w
 	repeat until all six drives partitioned .

 	mdadm --create /dev/md3 --chunk=64 --metadata=1.2 --verbose --bitmap=internal --level=6 --raid-devices=6 --spare-devices=0 /dev/sd[cdefgh]1
 	Built just fine .
In-kernel auto-assembly using partition type 0xFD only works for
metadata=0.90.  This is deliberate.

Don't use 0xFD partitions.  Use mdadm to assemble your array, either
via an initrd or (if it don't hold the root filesystem) via an init.d
script.

NeilBrown
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help