On Friday March 16, babydr@baby-dragons.com wrote:
Hello All , I am having a dickens of a time with preparing this system
to replace my present one .
I created a raid6 array over 6 147GB scsi drives .
steps I followed were .
fdisk /dev/sd[c-h] ( one at a time of course )
created a partition starting at cyl 2 & -10 Cyls from the end of the drive .
typed the partion FD
w
repeat until all six drives partitioned .
mdadm --create /dev/md3 --chunk=64 --metadata=1.2 --verbose --bitmap=internal --level=6 --raid-devices=6 --spare-devices=0 /dev/sd[cdefgh]1
Built just fine .
In-kernel auto-assembly using partition type 0xFD only works for
metadata=0.90. This is deliberate.
Don't use 0xFD partitions. Use mdadm to assemble your array, either
via an initrd or (if it don't hold the root filesystem) via an init.d
script.
NeilBrown