On 3/16/07, Benjamin Herrenschmidt [off-list ref] wrote:
quoted
+ PRINTK("\tfree slot %x: %d stride: %d\n", desc->phys, desc->idx, desc->stride);
Why don't you use the kernel existing debugging facilitie, like
pr_debug, or dev_dbg if you have a proper struct device (which you
should have with an arch/powerpc port hopefully using
of_platform_device).
This came from the the iop-adma driver. I blindly copied it from
drivers/md/raid5.c, but yes it should change to dev_dbg.
quoted
+ spin_lock_bh(&spe_chan->lock);
+ /* Allocate descriptor slots */
+ i = spe_chan->slots_allocated;
+ if (spe_chan->device->id != PPC440SPE_XOR_ID)
+ db_sz = sizeof (dma_cdb_t);
+ else
+ db_sz = sizeof (xor_cb_t);
+
+ for (; i < (plat_data->pool_size/db_sz); i++) {
+ slot = kzalloc(sizeof(struct spe_adma_desc_slot), GFP_KERNEL);
GFP_KERNEL within spin_lock_bh is no good...
This is an iop-adma wart... will fix.
quoted
diff --git a/include/asm-ppc/adma.h b/include/asm-ppc/adma.h
new file mode 100644
index 0000000..0be88f1
--- /dev/null
+++ b/include/asm-ppc/adma.h
There's way too many code in this .h file, too big inline functions. It
should mostly be moved to a .c file
The iop-adma driver uses separate .h files because the driver is
shared between iop3xx and iop13xx implementations and I did not want
the overhead of another indirect-branch layer. In this case the
hardware specific routines can be written inline since the driver is
only supporting one architecture... other suggestions?
Cheers,
Ben.
Regards,
Dan