Re: FailSpare event?

Started by Nix on Jan 15, 2007

open the first message on its own page

Message details and related content
On 15 Jan 2007, Bill Davidsen told this:
Nix wrote:
quoted
    Number   Major   Minor   RaidDevice State
       0       8        6        0      active sync   /dev/sda6
       1       8       22        1      active sync   /dev/sdb6
       3      22        5        2      active sync   /dev/hdc5

    Number   Major   Minor   RaidDevice State
       0       8       23        0      active sync   /dev/sdb7
       1       8        7        1      active sync   /dev/sda7
       3       3        5        2      active sync   /dev/hda5

0, 1, and *3*. Where has number 2 gone? (And how does `Number' differ
from `RaidDevice'? Why have both?)
Did you ever move the data to these drives from another? I think this
is what you see when you migrate by adding a drive as a spare, then
mark an existing drive as failed, so the data is rebuilt on the new
drive. Was there ever a device 2?
Nope. These arrays were created in one lump and never had a spare.

Plenty of pvmoves have happened on them, but that's *inside* the
arrays, of course...

-- 
`He accused the FSF of being "something of a hypocrit", which
 shows that he neither understands hypocrisy nor can spell.'
   --- jimmybgood
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help