On Sat, 21 Oct 2006, Dan wrote:
I have been using an older 64bit system, socket 754 for a while now. It has
the old PCI bus 33Mhz. I have two low cost (no HW RAID) PCI SATA I cards
each with 4 ports to give me an eight disk RAID 6. I also have a Gig NIC,
on the PCI bus. I have Gig switches with clients connecting to it at Gig
speed.
As many know you get a peak transfer rate of 133 MB/s or 1064Mb/s from that
PCI bus http://en.wikipedia.org/wiki/Peripheral_Component_Interconnect
The transfer rate is not bad across the network but my bottle neck it the
PCI bus. I have been shopping around for new MB and PCI-express cards. I
have been using mdadm for a long time and would like to stay with it. I am
having trouble finding an eight port PCI-express card that does not have all
the fancy HW RAID which jacks up the cost. I am now considering using a MB
with eight SATA II slots onboard. GIGABYTE GA-M59SLI-S5 Socket AM2 NVIDIA
nForce 590 SLI MCP ATX.
What are other users of mdadm using with the PCI-express cards, most cost
effective solution?
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Read this:
http://www.anandtech.com/IT/showdoc.aspx?i=2859
I have a similar setup to you, 6 IDE ATA/100 + 2 SATA/150 (all 400GB) in
an mdadm RAID5, works well but it maxes out the PCI bus unfortunately. At
some point I am going to do what you did, get 2 x SATA PCI-e SiL 3114
cards perhaps. Or, after reading that article, consider SAS maybe..?
Justin.