Hi,

Markus Gehring wrote:

I have a reproducable problem with corrupted data read from a RAID1-array.

Setup:
 HW:
  2 S-ATA-Disks (160GB each) -> /dev/md4 RAID1
  Promise S150 TX4 - Controller
  AMD Sempron 2200+

 SW:
  Fedora Core 3
  Kernel 2.6.10 unpatched
  Samba (for read/write-accesses)
  SW-Raid

Everything works fine with only one drive in the array. If the second is
synced up read accesses return corrupted data.

Interesting: If you remove again the second disk. The same files will be
 read correctly again (no matter if written while only one disk is in
the array or two are synced!)!

This makes it sound like bad data is getting written to the second disk 
during resync. Could you give more details about your test procedure (a 
script or list of steps that reproduces the problem would be great)?

I don't think samba is the culprit, but just to be sure, is there any 
chance you could reproduce the problem without samba in the equation? 
(From what you say above, I assume all reads and writes are coming from 
a samba client of some sort?)

Thanks,
Paul