Re: [PATCH 14/39] arm64: dts: qcom: sdm630: Add TSENS node
From: Thara Gopinath <hidden>
Date: 2021-07-29 10:50:59
Also in:
linux-arm-msm, linux-devicetree, lkml
Hi Konrad, On 7/28/21 6:25 PM, Konrad Dybcio wrote:
quoted hunk ↗ jump to hunk
This will enable temperature reporting for various SoC components. Signed-off-by: AngeloGioacchino Del Regno <redacted> Signed-off-by: Konrad Dybcio <redacted> --- .../devicetree/bindings/thermal/qcom-tsens.yaml | 1 + arch/arm64/boot/dts/qcom/sdm630.dtsi | 11 +++++++++++ 2 files changed, 12 insertions(+)diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 4a2eaf28e3fd..d3b9e9b600a2 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml@@ -48,6 +48,7 @@ properties: - qcom,sc7180-tsens - qcom,sc7280-tsens - qcom,sc8180x-tsens + - qcom,sdm630-tsens - qcom,sdm845-tsens - qcom,sm8150-tsens - qcom,sm8250-tsensdiff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 1e54828817d5..7e9c80e35fba 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi@@ -627,6 +627,17 @@ mnoc: interconnect@1745000 { <&mmcc AHB_CLK_SRC>; }; + tsens: thermal-sensor@10ae000 { + compatible = "qcom,sdm630-tsens", "qcom,tsens-v2"; + reg = <0x010ae000 0x1000>, /* TM */ + <0x010ad000 0x1000>; /* SROT */ + #qcom,sensors = <12>;
Are all 12 sensors used ? I see that in a later patch "arm64: dts: qcom: sdm630: Add thermal-zones configuration" only 9 are used.
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
tcsr_mutex_regs: syscon@1f40000 {
compatible = "syscon";
reg = <0x01f40000 0x20000>;-- Warm Regards Thara (She/Her/Hers)