Thread (9 messages) 9 messages, 5 authors, 2021-08-24

[PATCH 14/39] arm64: dts: qcom: sdm630: Add TSENS node

flat view
STALE1870d LANDED

From: Konrad Dybcio <hidden>
Date: 2021-07-28 22:26:25
Also in: linux-arm-msm, linux-devicetree, lkml
Subsystem: arm/qualcomm mailing list, arm/qualcomm support, open firmware and flattened device tree bindings, qualcomm tsens thermal driver, the rest, thermal · Maintainers: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Amit Kucheria, Thara Gopinath, Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano

Landed in mainline as 7c54b82b4545 on 2021-08-04.

This will enable temperature reporting for various SoC
components.

Signed-off-by: AngeloGioacchino Del Regno <redacted>
Signed-off-by: Konrad Dybcio <redacted>
---
 .../devicetree/bindings/thermal/qcom-tsens.yaml       |  1 +
 arch/arm64/boot/dts/qcom/sdm630.dtsi                  | 11 +++++++++++
 2 files changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 4a2eaf28e3fd..d3b9e9b600a2 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -48,6 +48,7 @@ properties:
               - qcom,sc7180-tsens
               - qcom,sc7280-tsens
               - qcom,sc8180x-tsens
+              - qcom,sdm630-tsens
               - qcom,sdm845-tsens
               - qcom,sm8150-tsens
               - qcom,sm8250-tsens
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 1e54828817d5..7e9c80e35fba 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -627,6 +627,17 @@ mnoc: interconnect@1745000 {
 				 <&mmcc AHB_CLK_SRC>;
 		};
 
+		tsens: thermal-sensor@10ae000 {
+			compatible = "qcom,sdm630-tsens", "qcom,tsens-v2";
+			reg = <0x010ae000 0x1000>, /* TM */
+				  <0x010ad000 0x1000>; /* SROT */
+			#qcom,sensors = <12>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					 <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0x01f40000 0x20000>;
-- 
2.32.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help