Thread (34 messages) 34 messages, 6 authors, 2016-11-14

Re: v4.8-rc1: thinkpad x60: running at low frequency even during kernel build

From: Pavel Machek <hidden>
Date: 2016-11-04 20:44:46
Also in: linux-acpi, lkml, platform-driver-x86

Hi!
quoted
Let me try v4.9-rc2... that works ok (cpus at the high frequency
during the kernel build). Unfortunately that sends my cpus to 99C
temperature range (and eventually forces emergency shutdown).
This we have to debug. Do you see same line like 
"
/sys/devices/system/cpu/cpu0/cpufreq/bios_limit:1000000
"
If not we need
to find out why.
I'd prefer mails over bugzilla for now...

4.9-rc2 has bios_limit:

pavel@duo:~$ cat /sys/devices/system/cpu/cpu0/cpufreq/bios_limit
1833000

and it has thermal zones:

/sys/devices/virtual/thermal/thermal_zone0/trip_point_0_temp 127000
/sys/devices/virtual/thermal/thermal_zone0/trip_point_0_type critical
/sys/devices/virtual/thermal/thermal_zone1/trip_point_0_temp 97000
/sys/devices/virtual/thermal/thermal_zone1/trip_point_0_type critical
/sys/devices/virtual/thermal/thermal_zone1/trip_point_1_temp 92500
/sys/devices/virtual/thermal/thermal_zone1/trip_point_1_type passive

..so it should slow down CPU at 92C.

So lets push the temperature up a bit...

sudo watch cat /proc/acpi/ibm/thermal
/sys/devices/system/cpu/cpu0/cpufreq/bios_limit
/sys/devices/virtual/thermal/thermal_zone1/temp  /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq

temperatures:   98 49 -128 85 28 -128 28 -128 49 58 -128 -128 -128
-128 -128 -128
1833000
95000
1833000

Hmm. bios_limit does not seem to change, even when the temperature is
clearly above the trip point. (It is also interestng that acpi/ibm
reports bigger temperatures than
/sys/devices/virtual/thermal/thermal_zone1/temp . I have seen 103C there.)



									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachments

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help