Re: [PATCH 3/3] ARM64: dts: mt8173: Add thermal/auxadc device nodes
From: Matthias Brugger <matthias.bgg@gmail.com>
Date: 2016-02-18 16:18:57
Also in:
linux-arm-kernel, linux-mediatek, lkml
Hi Sascha, On 30/11/15 12:42, Sascha Hauer wrote:
quoted hunk ↗ jump to hunk
This adds the thermal controller and auxadc nodes to the Mediatek MT8173 dtsi file. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Daniel Kurtz <redacted> --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 06a1564..e2ddd03 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi@@ -277,6 +277,11 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + auxadc: auxadc@11001000 { + compatible = "mediatek,mt8173-auxadc";
Can you please write a small Documentation about the binding. I suppose it will be mediatek,auxadc and mediatek,mt8173-auxadc. I can't do it my self, as my datasheet lacks the auxadc registers. Thanks, Matthias
quoted hunk ↗ jump to hunk
+ reg = <0 0x11001000 0 0x1000>; + }; + uart0: serial@11002000 { compatible = "mediatek,mt8173-uart", "mediatek,mt6577-uart";@@ -487,6 +492,18 @@ clock-names = "source", "hclk"; status = "disabled"; }; + + thermal: thermal@1100b000 { + #thermal-sensor-cells = <0>; + compatible = "mediatek,mt8173-thermal"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&pericfg MT8173_PERI_THERM_SW_RST>; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + }; }; };