On Mon, Nov 30, 2015 at 12:42:30PM +0100, Sascha Hauer wrote:

This series adds support for the thermal sensors included in the
MT8173 SoC. Currently only basic temperature reading is supported
without any interrupt support.

Merged v12.

	fan: gpio_fan {
		compatible = "gpio-fan";
		gpios = <&pio 24 0>;
		gpio-fan,speed-map = <0    0
				      4500 1>;
		#cooling-cells = <2>;
	};

	thermal-zones {
			cpu_thermal: cpu_thermal {
			polling-delay-passive = <1000>; /* milliseconds */
			polling-delay = <1000>; /* milliseconds */

			thermal-sensors = <&thermal>;

			trips {
				cpu_passive: cpu_passive {
					temperature = <47000>; /* millicelsius */
					hysteresis = <2000>; /* millicelsius */
					type = "passive";
				};

				cpu_crit {
					temperature = <90000>; /* millicelsius */
					hysteresis = <2000>; /* millicelsius */
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu_passive>;
					cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};
	};

But, as usual, the dt changes go via your machine tree.

You may add my 
Acked-by: Eduardo Valentin <edubezval@gmail.com>

in your DT patch.