[PATCH v3 06/20] phy: qcom-qmp-ufs: Move HS Rate B register setting to tbls_hs_b

From: Manivannan Sadhasivam <hidden>
Date: 2022-11-23 07:50:27
Also in: linux-arm-msm, linux-scsi, lkml
Subsystem: arm/qualcomm mailing list, generic phy framework, the rest · Maintainers: Vinod Koul, Linus Torvalds

Since now there is support for configuring the HS Rate B mode properly,
let's move the register setting to tbls_hs_b struct for all SoCs.

This allows the PHY to be configured in Rate A initially and then in
Rate B if requested by the UFS driver.

Reviewed-by: Dmitry Baryshkov <redacted>
Signed-off-by: Manivannan Sadhasivam <redacted>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 33 +++++++++++++++++++++----
 1 file changed, 28 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 1b6e76bf82e5..f6a962df9df1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c

@@ -228,8 +228,9 @@ static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
 	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL1, 0xff),
 	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
+};
 
-	/* Rate B */
+static const struct qmp_phy_init_tbl sm6115_ufsphy_hs_b_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x44),
 };

@@ -305,8 +306,9 @@ static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
 	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
 	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
+};
 
-	/* Rate B */
+static const struct qmp_phy_init_tbl sdm845_ufsphy_hs_b_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
 };

@@ -371,8 +373,9 @@ static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f),
 	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
 	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+};
 
-	/* Rate B */
+static const struct qmp_phy_init_tbl sm8150_ufsphy_hs_b_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06),
 };

@@ -420,7 +423,6 @@ static const struct qmp_phy_init_tbl sm8150_ufsphy_rx[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
 	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
 	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
-
 };
 
 static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs[] = {

@@ -458,8 +460,9 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x1e),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+};
 
-	/* Rate B */
+static const struct qmp_phy_init_tbl sm8350_ufsphy_hs_b_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06),
 };

@@ -712,6 +715,10 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
 		.pcs		= sdm845_ufsphy_pcs,
 		.pcs_num	= ARRAY_SIZE(sdm845_ufsphy_pcs),
 	},
+	.tbls_hs_b = {
+		.serdes		= sdm845_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sdm845_ufsphy_hs_b_serdes),
+	},
 	.clk_list		= sdm845_ufs_phy_clk_l,
 	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
 	.vreg_list		= qmp_phy_vreg_l,

@@ -738,6 +745,10 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
 		.pcs		= sm6115_ufsphy_pcs,
 		.pcs_num	= ARRAY_SIZE(sm6115_ufsphy_pcs),
 	},
+	.tbls_hs_b = {
+		.serdes		= sm6115_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sm6115_ufsphy_hs_b_serdes),
+	},
 	.clk_list		= sdm845_ufs_phy_clk_l,
 	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
 	.vreg_list		= qmp_phy_vreg_l,

@@ -763,6 +774,10 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
 		.pcs		= sm8150_ufsphy_pcs,
 		.pcs_num	= ARRAY_SIZE(sm8150_ufsphy_pcs),
 	},
+	.tbls_hs_b = {
+		.serdes		= sm8150_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes),
+	},
 	.clk_list		= sdm845_ufs_phy_clk_l,
 	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
 	.vreg_list		= qmp_phy_vreg_l,

@@ -787,6 +802,10 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
 		.pcs		= sm8350_ufsphy_pcs,
 		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_pcs),
 	},
+	.tbls_hs_b = {
+		.serdes		= sm8350_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
+	},
 	.clk_list		= sdm845_ufs_phy_clk_l,
 	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
 	.vreg_list		= qmp_phy_vreg_l,

@@ -811,6 +830,10 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
 		.pcs		= sm8350_ufsphy_pcs,
 		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_pcs),
 	},
+	.tbls_hs_b = {
+		.serdes		= sm8350_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
+	},
 	.clk_list		= sm8450_ufs_phy_clk_l,
 	.num_clks		= ARRAY_SIZE(sm8450_ufs_phy_clk_l),
 	.vreg_list		= qmp_phy_vreg_l,

-- 
2.25.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help