[PATCHv3 0/6] Meson-8b and Meson-gxbb Fix some missing code · Anand Moon <hidden> · 2021-08-17
[PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Anand Moon <hidden> · 2021-08-17
Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Martin Blumenstingl <martin.blumenstingl@googlemail.com> · 2021-08-28
Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Neil Armstrong <hidden> · 2021-08-30
Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Martin Blumenstingl <martin.blumenstingl@googlemail.com> · 2021-08-30
Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Neil Armstrong <hidden> · 2021-08-31
Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Anand Moon <hidden> · 2021-08-31
Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Martin Blumenstingl <martin.blumenstingl@googlemail.com> · 2021-09-21
Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node · Anand Moon <hidden> · 2021-09-25
[PATCHv3 2/6] ARM: dts: meson8b: odroidc1: Set usb power source to always on · Anand Moon <hidden> · 2021-08-17
Re: [PATCHv3 2/6] ARM: dts: meson8b: odroidc1: Set usb power source to always on · Martin Blumenstingl <martin.blumenstingl@googlemail.com> · 2021-08-28
[PATCHv3 3/6] arm64: dts: amlogic: odroidc2: Fix the chip enable signal for usb power · Anand Moon <hidden> · 2021-08-17
Re: [PATCHv3 3/6] arm64: dts: amlogic: odroidc2: Fix the chip enable signal for usb power · Martin Blumenstingl <martin.blumenstingl@googlemail.com> · 2021-08-28
[PATCHv3 4/6] arm64: dts: amlogic: odroidc2: use vbus-supply for power source for usb nodes · Anand Moon <hidden> · 2021-08-17
Re: [PATCHv3 4/6] arm64: dts: amlogic: odroidc2: use vbus-supply for power source for usb nodes · Martin Blumenstingl <martin.blumenstingl@googlemail.com> · 2021-08-28
[PATCHv3 5/6] phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset mode · Anand Moon <hidden> · 2021-08-17
Re: [PATCHv3 5/6] phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset mode · Vinod Koul <vkoul@kernel.org> · 2021-08-17
[PATCHv3 6/6] phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER · Anand Moon <hidden> · 2021-08-17
Re: [PATCHv3 6/6] phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER · Vinod Koul <vkoul@kernel.org> · 2021-08-17

Re: [PATCHv3 1/6] ARM: dts: meson8b: odroidc1: Add usb phy power node

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: 2021-09-21 02:53:19
Also in: linux-amlogic, linux-arm-kernel, linux-devicetree, lkml

Hi Anand,

On Tue, Aug 31, 2021 at 10:48 PM Anand Moon [off-list ref] wrote:
[...]

After enabling CONFIG_REGULATOR_DEBUG, with this patch applied
I still not getting the USB regulator to enable.
Do you see different output at your end?

I don't have much time for testing and debugging currently but I'll
put it on my TODO-list
Until either of us has found the issue I suggest not merging this patch.


Best regards,
Martin

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help