On Tue, Nov 29, 2016 at 05:07:51PM +0100, Michal Hocko wrote:

On Tue 29-11-16 07:55:37, Marc MERLIN wrote:

quoted

On Mon, Nov 28, 2016 at 08:23:15AM +0100, Michal Hocko wrote:

quoted

Marc, could you try this patch please? I think it should be pretty clear
it should help you but running it through your use case would be more
than welcome before I ask Greg to take this to the 4.8 stable tree.

I ran it overnight and copied 1.4TB with it before it failed because
there wasn't enough disk space on the other side, so I think it fixes
the problem too.

Can I add your Tested-by?

Done.

Now, probably unrelated, but hard to be sure, doing those big copies
causes massive hangs on my system. I hit a few of the 120s hangs,
but more generally lots of things hang, including shells, my DNS server,
monitoring reading from USB and timing out, and so forth.
Examples below. 
I have a hard time telling what is the fault, but is there a chance it
might be memory allocation pressure?
I already have a preempt kernel, so I can't make it more preempt than
that.
Now, to be fair, this is not a new problem, it's just varying degrees of
bad and usually only happens when I do a lot of I/O with btrfs.
That said, btrfs may very well just be suffering from memory allocation
issues and hanging as a result, with everything else on my system also
hanging for similar reasons until the memory pressure goes away with the
copy or scrub are finished.

What do you think?

[28034.954435] INFO: task btrfs:5618 blocked for more than 120 seconds.
[28034.975471]       Tainted: G     U          4.8.10-amd64-preempt-sysrq-20161121vb3tj1 #12
[28035.000964] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[28035.025429] btrfs           D ffff91154d33fc70     0  5618   5372 0x00000080
[28035.047717]  ffff91154d33fc70 0000000000200246 ffff911842f880c0 ffff9115a4cf01c0
[28035.071020]  ffff91154d33fc58 ffff91154d340000 ffff91165493bca0 ffff9115623773f0
[28035.094252]  0000000000001000 0000000000000001 ffff91154d33fc88 ffffffffb86cf1a6
[28035.117538] Call Trace:
[28035.125791]  [<ffffffffb86cf1a6>] schedule+0x8b/0xa3
[28035.141550]  [<ffffffffb82bd18e>] btrfs_start_ordered_extent+0xce/0x122
[28035.162457]  [<ffffffffb809af6c>] ? wake_up_atomic_t+0x2c/0x2c
[28035.180891]  [<ffffffffb82bd434>] btrfs_wait_ordered_range+0xa9/0x10d
[28035.201723]  [<ffffffffb82aec04>] btrfs_truncate+0x40/0x24b
[28035.219269]  [<ffffffffb82af437>] btrfs_setattr+0x1da/0x2d7
[28035.237032]  [<ffffffffb81c7507>] notify_change+0x252/0x39c
[28035.254566]  [<ffffffffb81ad35b>] do_truncate+0x81/0xb4
[28035.271057]  [<ffffffffb81ad467>] vfs_truncate+0xd9/0xf9
[28035.287782]  [<ffffffffb81ad4ea>] do_sys_truncate+0x63/0xa7

I get other hangs like:

[10338.968912] perf: interrupt took too long (3927 > 3917), lowering kernel.perf_event_max_sample_rate to 50750

[12971.047705] ftdi_sio ttyUSB15: usb_serial_generic_read_bulk_callback - urb stopped: -32

[17761.122238] usb 4-1.4: USB disconnect, device number 39
[17761.141063] usb 4-1.4: usbfs: USBDEVFS_CONTROL failed cmd hub-ctrl rqt 160 rq 6 len 1024 ret -108
[17761.263252] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
[17761.938575] usb 4-1.4: new SuperSpeed USB device number 40 using xhci_hcd

[24130.574425] hpet1: lost 2306 rtc interrupts
[24156.034950] hpet1: lost 1628 rtc interrupts
[24173.314738] hpet1: lost 1104 rtc interrupts
[24180.129950] hpet1: lost 436 rtc interrupts
[24257.557955] hpet1: lost 4954 rtc interrupts
[24267.522656] hpet1: lost 637 rtc interrupts

Thanks,
Marc
-- 
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/                         | PGP 1024R/763BE901

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>