(2012/02/02 23:18), Srikar Dronamraju wrote:

Changelog: (Since v9) : Use insn_offset_modrm as suggested by Masami Hiramatsu.

Would you add REX.B clearing code to handle_riprel_insn() too?
Of course, that might not happen because it's a non-effective bit,
however user can program it and pass it to uprobes.

+static void handle_riprel_insn(struct mm_struct *mm, struct uprobe *uprobe,
+							struct insn *insn)
+{
+	u8 *cursor;
+	u8 reg;
+
+	if (mm->context.ia32_compat)
+		return;
+
+	uprobe->arch_info.rip_rela_target_address = 0x0;
+	if (!insn_rip_relative(insn))
+		return;
+

So, here you need a REX.B clearing, like below.

insn_get_length(insn);
if (insn->rex_prefix.nbytes) {
	cursor = uprobe->insn + insn_offset_rex_prefix(insn);
	*cursor &= 0xfe;	/* Clearing REX.B bit */
}

+	/*
+	 * Point cursor at the modrm byte.  The next 4 bytes are the
+	 * displacement.  Beyond the displacement, for some instructions,
+	 * is the immediate operand.
+	 */
+	cursor = uprobe->insn + insn_offset_modrm(insn);
+	insn_get_length(insn);
+
+	/*
+	 * Convert from rip-relative addressing to indirect addressing
+	 * via a scratch register.  Change the r/m field from 0x5 (%rip)
+	 * to 0x0 (%rax) or 0x1 (%rcx), and squeeze out the offset field.
+	 */
+	reg = MODRM_REG(insn);
+	if (reg == 0) {
+		/*
+		 * The register operand (if any) is either the A register
+		 * (%rax, %eax, etc.) or (if the 0x4 bit is set in the
+		 * REX prefix) %r8.  In any case, we know the C register
+		 * is NOT the register operand, so we use %rcx (register
+		 * #1) for the scratch register.
+		 */
+		uprobe->arch_info.fixups = UPROBES_FIX_RIP_CX;
+		/* Change modrm from 00 000 101 to 00 000 001. */
+		*cursor = 0x1;
+	} else {
+		/* Use %rax (register #0) for the scratch register. */
+		uprobe->arch_info.fixups = UPROBES_FIX_RIP_AX;
+		/* Change modrm from 00 xxx 101 to 00 xxx 000 */
+		*cursor = (reg << 3);
+	}
+
+	/* Target address = address of next instruction + (signed) offset */
+	uprobe->arch_info.rip_rela_target_address = (long)insn->length
+					+ insn->displacement.value;
+	/* Displacement field is gone; slide immediate field (if any) over. */
+	if (insn->immediate.nbytes) {
+		cursor++;
+		memmove(cursor, cursor + insn->displacement.nbytes,
+						insn->immediate.nbytes);
+	}
+	return;
+}

Thank you,

-- 
Masami HIRAMATSU
Software Platform Research Dept. Linux Technology Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: masami.hiramatsu.pt@hitachi.com

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>