Re: [PATCH 02/45] clk: at91: Make sure clk_init_data is fully initialized

On 21/08/2026 at 10:53, Geert Uytterhoeven wrote:

The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need.  However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.

Make sure all members are fully initialized, to avoid such bugs, and to
prevent future breakage when converting drivers to a different method
for specifying the parents.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Compile-tested only.
---
  drivers/clk/at91/clk-audio-pll.c | 4 ++--
  drivers/clk/at91/clk-h32mx.c     | 2 +-
  drivers/clk/at91/clk-main.c      | 2 +-
  drivers/clk/at91/clk-pll.c       | 2 +-
  drivers/clk/at91/clk-plldiv.c    | 2 +-
  drivers/clk/at91/clk-slow.c      | 2 +-
  drivers/clk/at91/clk-smd.c       | 2 +-
  drivers/clk/at91/clk-usb.c       | 6 +++---
  drivers/clk/at91/sckc.c          | 2 +-
  9 files changed, 12 insertions(+), 12 deletions(-)

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

Thanks Geert,
   Nicolas