Re: [PATCH 2/2] sched: Centralize SCHED_{SMT, MC, CLUSTER} definitions
From: Barry Song <hidden>
Date: 2021-10-08 12:37:49
Also in:
linux-s390, linux-sh, linuxppc-dev, lkml, sparclinux
On Sat, Oct 9, 2021 at 12:54 AM Valentin Schneider [off-list ref] wrote:
Barry recently introduced a new CONFIG_SCHED_CLUSTER, and discussions around that highlighted that every architecture redefines its own help text and dependencies for CONFIG_SCHED_SMT and CONFIG_SCHED_MC. Move the definition of those to scheduler's Kconfig to centralize help text and generic dependencies (i.e. SMP). Make them depend on a matching ARCH_SUPPORTS_SCHED_* which the architectures can select with the relevant architecture-specific dependency. s390 uses its own topology table (set_sched_topology()) and doesn't seem to cope without SCHED_MC or SCHED_SMT, so those remain untogglable.
Hi Valentin, Thanks! I believe this is a cleaner way for Kconfig itself. But I am not quite sure this is always beneficial of all platforms. It would be perfect if the patch has no side effects and doesn't change the existing behaviour. But it has side effects by changing the default N to Y on a couple of platforms.
quoted hunk ↗ jump to hunk
Suggested-by: Barry Song <redacted> Signed-off-by: Valentin Schneider <redacted> --- arch/arm/Kconfig | 18 ++---------------- arch/arm64/Kconfig | 26 +++----------------------- arch/ia64/Kconfig | 9 +-------- arch/mips/Kconfig | 10 +--------- arch/parisc/Kconfig | 9 +-------- arch/powerpc/Kconfig | 9 +-------- arch/s390/Kconfig | 8 ++------ arch/sh/Kconfig | 1 + arch/sh/mm/Kconfig | 9 --------- arch/sparc/Kconfig | 20 ++------------------ arch/x86/Kconfig | 26 +++----------------------- kernel/sched/Kconfig | 43 +++++++++++++++++++++++++++++++++++++++++++ 12 files changed, 60 insertions(+), 128 deletions(-)diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index fc196421b2ce..13aac98edf06 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig@@ -32,6 +32,8 @@ config ARM select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7 select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE + select ARCH_SUPPORTS_SCHED_SMT if ARM_CPU_TOPOLOGY + select ARCH_SUPPORTS_SCHED_MC if ARM_CPU_TOPOLOGY select ARCH_USE_BUILTIN_BSWAP select ARCH_USE_CMPXCHG_LOCKREF select ARCH_USE_MEMTEST@@ -1166,22 +1168,6 @@ config ARM_CPU_TOPOLOGY affinity between processors which is then used to describe the cpu topology of an ARM System. -config SCHED_MC - bool "Multi-core scheduler support" - depends on ARM_CPU_TOPOLOGY - help - Multi-core scheduler support improves the CPU scheduler's decision - making when dealing with multi-core CPU chips at a cost of slightly - increased overhead in some places. If unsure say N here. - -config SCHED_SMT - bool "SMT scheduler support" - depends on ARM_CPU_TOPOLOGY - help - Improves the CPU scheduler's decision making when dealing with - MultiThreading at a cost of slightly increased overhead in some - places. If unsure say N here. - config HAVE_ARM_SCU bool helpdiff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index d13677f4731d..8a49dd33f5e3 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig@@ -88,6 +88,9 @@ config ARM64 select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 select ARCH_SUPPORTS_NUMA_BALANCING + select ARCH_SUPPORTS_SCHED_SMT + select ARCH_SUPPORTS_SCHED_MC + select ARCH_SUPPORTS_SCHED_CLUSTER select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT select ARCH_WANT_DEFAULT_BPF_JIT select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT@@ -982,29 +985,6 @@ config CPU_LITTLE_ENDIAN endchoice -config SCHED_MC - bool "Multi-core scheduler support" - help - Multi-core scheduler support improves the CPU scheduler's decision - making when dealing with multi-core CPU chips at a cost of slightly - increased overhead in some places. If unsure say N here. - -config SCHED_CLUSTER - bool "Cluster scheduler support" - help - Cluster scheduler support improves the CPU scheduler's decision - making when dealing with machines that have clusters of CPUs. - Cluster usually means a couple of CPUs which are placed closely - by sharing mid-level caches, last-level cache tags or internal - busses. - -config SCHED_SMT - bool "SMT scheduler support" - help - Improves the CPU scheduler's decision making when dealing with - MultiThreading at a cost of slightly increased overhead in some - places. If unsure say N here. - config NR_CPUS int "Maximum number of CPUs (2-4096)" range 2 4096diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 045792cde481..67f3d84242ae 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig@@ -18,6 +18,7 @@ config IA64 select ARCH_ENABLE_MEMORY_HOTPLUG select ARCH_ENABLE_MEMORY_HOTREMOVE select ARCH_SUPPORTS_ACPI + select ARCH_SUPPORTS_SCHED_SMT select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI select FORCE_PCI@@ -247,14 +248,6 @@ config HOTPLUG_CPU can be controlled through /sys/devices/system/cpu/cpu#. Say N if you want to disable CPU hotplug. -config SCHED_SMT - bool "SMT scheduler support" - depends on SMP - help - Improves the CPU scheduler's decision making when dealing with - Intel IA64 chips with MultiThreading at a cost of slightly increased - overhead in some places. If unsure say N here. - config PERMIT_BSP_REMOVE bool "Support removal of Bootstrap Processor" depends on HOTPLUG_CPUdiff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 771ca53af06d..cc60d440b097 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig@@ -2373,17 +2373,9 @@ config MIPS_MT_SMP config MIPS_MT bool -config SCHED_SMT - bool "SMT (multithreading) scheduler support" - depends on SYS_SUPPORTS_SCHED_SMT - default n - help - SMT scheduler support improves the CPU scheduler's decision making - when dealing with MIPS MT enabled cores at a cost of slightly - increased overhead in some places. If unsure say N here. - config SYS_SUPPORTS_SCHED_SMT bool + select ARCH_SUPPORTS_SCHED_SMT config SYS_SUPPORTS_MULTITHREADING booldiff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 4742b6f169b7..6aaa962ec2f4 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig@@ -13,6 +13,7 @@ config PARISC select ARCH_NO_SG_CHAIN select ARCH_SUPPORTS_HUGETLBFS if PA20 select ARCH_SUPPORTS_MEMORY_FAILURE + select ARCH_SUPPORTS_SCHED_MC if PARISC_CPU_TOPOLOGY && PA8X00 select DMA_OPS select RTC_CLASS select RTC_DRV_GENERIC@@ -295,14 +296,6 @@ config PARISC_CPU_TOPOLOGY help Support PARISC cpu topology definition. -config SCHED_MC - bool "Multi-core scheduler support" - depends on PARISC_CPU_TOPOLOGY && PA8X00 - help - Multi-core scheduler support improves the CPU scheduler's decision - making when dealing with multi-core CPU chips at a cost of slightly - increased overhead in some places. If unsure say N here. - config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" default ydiff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index ba5b66189358..9f45b92ccac1 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig@@ -151,6 +151,7 @@ config PPC select ARCH_STACKWALK select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_SUPPORTS_DEBUG_PAGEALLOC if PPC32 || PPC_BOOK3S_64 + select ARCH_SUPPORTS_SCHED_SMT if PPC64 select ARCH_USE_BUILTIN_BSWAP select ARCH_USE_CMPXCHG_LOCKREF if PPC64 select ARCH_USE_MEMTEST@@ -861,14 +862,6 @@ config PPC_PROT_SAO_LPAR config PPC_COPRO_BASE bool -config SCHED_SMT - bool "SMT (Hyperthreading) scheduler support" - depends on PPC64 && SMP - help - SMT scheduler support improves the CPU scheduler's decision making - when dealing with POWER5 cpus at a cost of slightly increased - overhead in some places. If unsure say N here. - config PPC_DENORMALISATION bool "PowerPC denormalisation exception handling" depends on PPC_BOOK3S_64diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index b86de61b8caa..a0b4117cb1fa 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig@@ -483,12 +483,6 @@ config NODES_SHIFT depends on NUMA default "1" -config SCHED_SMT - def_bool n - -config SCHED_MC - def_bool n - config SCHED_BOOK def_bool n@@ -498,6 +492,8 @@ config SCHED_DRAWER config SCHED_TOPOLOGY def_bool y prompt "Topology scheduler support" + select ARCH_SUPPORTS_SCHED_SMT + select ARCH_SUPPORTS_SCHED_MC select SCHED_SMT select SCHED_MC select SCHED_BOOKdiff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 6904f4bdbf00..7380ee27d252 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig@@ -13,6 +13,7 @@ config SUPERH select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HIBERNATION_POSSIBLE if MMU select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_SUPPORTS_SCHED_MC select ARCH_WANT_IPC_PARSE_VERSION select CPU_NO_EFFICIENT_FFS select DMA_DECLARE_COHERENTdiff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index ba569cfb4368..1d9f7006a72a 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig@@ -208,15 +208,6 @@ config HUGETLB_PAGE_SIZE_64MB endchoice -config SCHED_MC - bool "Multi-core scheduler support" - depends on SMP - default y - help - Multi-core scheduler support improves the CPU scheduler's decision - making when dealing with multi-core CPU chips at a cost of slightly - increased overhead in some places. If unsure say N here. - endmenu menu "Cache configuration"diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index b120ed947f50..a6cf30d37725 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig@@ -86,6 +86,8 @@ config SPARC64 select HAVE_ARCH_AUDITSYSCALL select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_SUPPORTS_DEBUG_PAGEALLOC + select ARCH_SUPPORTS_SCHED_SMT + select ARCH_SUPPORTS_SCHED_MC select HAVE_NMI select HAVE_REGS_AND_STACK_ACCESS_API select ARCH_USE_QUEUED_RWLOCKS@@ -290,24 +292,6 @@ if SPARC64 source "kernel/power/Kconfig" endif -config SCHED_SMT - bool "SMT (Hyperthreading) scheduler support" - depends on SPARC64 && SMP - default y - help - SMT scheduler support improves the CPU scheduler's decision making - when dealing with SPARC cpus at a cost of slightly increased overhead - in some places. If unsure say N here. - -config SCHED_MC - bool "Multi-core scheduler support" - depends on SPARC64 && SMP - default y - help - Multi-core scheduler support improves the CPU scheduler's decision - making when dealing with multi-core CPU chips at a cost of slightly - increased overhead in some places. If unsure say N here. - config CMDLINE_BOOL bool "Default bootloader kernel arguments" depends on SPARC64diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 349e59b2f0e3..87a91fd33d85 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig@@ -107,6 +107,9 @@ config X86 select ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP if NR_CPUS <= 4096 select ARCH_SUPPORTS_LTO_CLANG select ARCH_SUPPORTS_LTO_CLANG_THIN + select ARCH_SUPPORTS_SCHED_SMT + select ARCH_SUPPORTS_SCHED_MC + select ARCH_SUPPORTS_SCHED_CLUSTER select ARCH_USE_BUILTIN_BSWAP select ARCH_USE_MEMTEST select ARCH_USE_QUEUED_RWLOCKS@@ -1001,29 +1004,6 @@ config NR_CPUS This is purely to save memory: each supported CPU adds about 8KB to the kernel image. -config SCHED_CLUSTER - bool "Cluster scheduler support" - depends on SMP - default y - help - Cluster scheduler support improves the CPU scheduler's decision - making when dealing with machines that have clusters of CPUs. - Cluster usually means a couple of CPUs which are placed closely - by sharing mid-level caches, last-level cache tags or internal - busses. - -config SCHED_SMT - def_bool y if SMP - -config SCHED_MC - def_bool y - prompt "Multi-core scheduler support" - depends on SMP - help - Multi-core scheduler support improves the CPU scheduler's decision - making when dealing with multi-core CPU chips at a cost of slightly - increased overhead in some places. If unsure say N here. - config SCHED_MC_PRIO bool "CPU core priorities scheduler support" depends on SCHED_MC && CPU_SUP_INTELdiff --git a/kernel/sched/Kconfig b/kernel/sched/Kconfig index c8b8e12c9c9c..9ceb08f42aeb 100644 --- a/kernel/sched/Kconfig +++ b/kernel/sched/Kconfig@@ -131,3 +131,46 @@ config SCHED_CORE SCHED_CORE is default disabled. When it is enabled and unused, which is the likely usage by Linux distributions, there should be no measurable impact on performance. + + +# +# For architectuers that want to enable generic scheduler handling of +# different topology levels: +# +config ARCH_SUPPORTS_SCHED_SMT + bool + +config ARCH_SUPPORTS_SCHED_MC + bool + +config ARCH_SUPPORTS_SCHED_CLUSTER + bool + +config SCHED_SMT + bool "SMT scheduler support" + depends on ARCH_SUPPORTS_SCHED_SMT && SMP + default y + help + Improves the CPU scheduler's decision making when dealing with + MultiThreading at a cost of slightly increased overhead in some + places. If unsure say N here. + +config SCHED_MC + bool "Multi-core scheduler support" + depends on ARCH_SUPPORTS_SCHED_MC && SMP + default y + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + +config SCHED_CLUSTER + bool "Cluster scheduler support" + depends on ARCH_SUPPORTS_SCHED_CLUSTER && SMP + default y + help + Cluster scheduler support improves the CPU scheduler's decision + making when dealing with machines that have clusters of CPUs. + Cluster usually means a couple of CPUs which are placed closely + by sharing mid-level caches, last-level cache tags or internal + busses. --2.25.1
Thanks barry