[PATCH 05/11] irqchip/irq-brcmstb-l2: Switch to IRQCHIP_PLATFORM_DRIVER
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2021-09-24 17:07:56
Also in:
linux-arm-kernel, linux-devicetree, linux-sh, lkml
Subsystem:
broadcom bmips mips architecture, irqchip drivers, the rest · Maintainers:
Florian Fainelli, Thomas Gleixner, Linus Torvalds
Allow the user selection and building of this interrupt controller driver as a module since it is used on ARM/ARM64 based systems as a second level interrupt controller hanging off the ARM GIC and is therefore loadable during boot. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/irqchip/Kconfig | 4 +++- drivers/irqchip/irq-brcmstb-l2.c | 16 +++++++++------- 2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 3022f6137096..dfe54bf9b35f 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig@@ -128,7 +128,9 @@ config BCM7120_L2_IRQ select IRQ_DOMAIN config BRCMSTB_L2_IRQ - bool + tristate "Broadcom STB generic L2 interrupt controller driver" + depends on ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC + default ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC select GENERIC_IRQ_CHIP select IRQ_DOMAIN
diff --git a/drivers/irqchip/irq-brcmstb-l2.c b/drivers/irqchip/irq-brcmstb-l2.c
index 8e0911561f2d..e4efc08ac594 100644
--- a/drivers/irqchip/irq-brcmstb-l2.c
+++ b/drivers/irqchip/irq-brcmstb-l2.c@@ -275,16 +275,18 @@ static int __init brcmstb_l2_edge_intc_of_init(struct device_node *np, { return brcmstb_l2_intc_of_init(np, parent, &l2_edge_intc_init); } -IRQCHIP_DECLARE(brcmstb_l2_intc, "brcm,l2-intc", brcmstb_l2_edge_intc_of_init); -IRQCHIP_DECLARE(brcmstb_hif_spi_l2_intc, "brcm,hif-spi-l2-intc", - brcmstb_l2_edge_intc_of_init); -IRQCHIP_DECLARE(brcmstb_upg_aux_aon_l2_intc, "brcm,upg-aux-aon-l2-intc", - brcmstb_l2_edge_intc_of_init); static int __init brcmstb_l2_lvl_intc_of_init(struct device_node *np, struct device_node *parent) { return brcmstb_l2_intc_of_init(np, parent, &l2_lvl_intc_init); } -IRQCHIP_DECLARE(bcm7271_l2_intc, "brcm,bcm7271-l2-intc", - brcmstb_l2_lvl_intc_of_init); + +IRQCHIP_PLATFORM_DRIVER_BEGIN(brcmstb_l2) +IRQCHIP_MATCH("brcm,l2-intc", brcmstb_l2_edge_intc_of_init) +IRQCHIP_MATCH("brcm,hif-spi-l2-intc", brcmstb_l2_edge_intc_of_init) +IRQCHIP_MATCH("brcm,upg-aux-aon-l2-intc", brcmstb_l2_edge_intc_of_init) +IRQCHIP_MATCH("brcm,bcm7271-l2-intc", brcmstb_l2_lvl_intc_of_init) +IRQCHIP_PLATFORM_DRIVER_END(brcmstb_l2) +MODULE_DESCRIPTION("Broadcom STB generic L2 interrupt controller"); +MODULE_LICENSE("GPL v2");
--
2.25.1