[PATCH 3/5] ARM: dts: qcom-apq8060: Correct Ethernet node name and drop bogus irq property
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: 2021-05-20 14:09:29
Also in:
linux-arm-msm, linux-devicetree, lkml, netdev
Subsystem:
the rest · Maintainer:
Linus Torvalds
make dtbs_check:
ethernet-ebi2@2,0: $nodename:0: 'ethernet-ebi2@2,0' does not match '^ethernet(@.*)?$'
ethernet-ebi2@2,0: 'smsc,irq-active-low' does not match any of the regexes: 'pinctrl-[0-9]+'
There is no "smsc,irq-active-low" property, as active low is the
default.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index dace8ffeb99118cb..0a4ffd10c48464f5 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts@@ -581,7 +581,7 @@ external-bus@1a100000 { * EBI2. This has a 25MHz chrystal next to it, so no * clocking is needed. */ - ethernet-ebi2@2,0 { + ethernet@2,0 { compatible = "smsc,lan9221", "smsc,lan9115"; reg = <2 0x0 0x100>; /*
@@ -598,8 +598,6 @@ ethernet-ebi2@2,0 { phy-mode = "mii"; reg-io-width = <2>; smsc,force-external-phy; - /* IRQ on edge falling = active low */ - smsc,irq-active-low; smsc,irq-push-pull; /*
--
2.25.1