Thread (9 messages) 9 messages, 2 authors, 2021-03-04
STALE1950d
Revisions (5)
  1. v1 [diff vs current]
  2. v2 current
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v5 [diff vs current]

[PATCH v2 6/7] dt-bindings: interrupt-controller: Add Loongson-2K1000 LIOINTC

From: Qing Zhang <hidden>
Date: 2021-03-03 12:57:24
Also in: linux-devicetree, lkml
Subsystem: irqchip drivers, open firmware and flattened device tree bindings, the rest · Maintainers: Thomas Gleixner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Add liointc-2.0 properties support, so update the maxItems and description.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <redacted>
---

v2:
- Add new patch

 .../bindings/interrupt-controller/loongson,liointc.yaml  | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
index f38e0113f360..96162b9d227c 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
@@ -10,9 +10,9 @@ maintainers:
   - Jiaxun Yang <jiaxun.yang@flygoat.com>
 
 description: |
-  This interrupt controller is found in the Loongson-3 family of chips as the primary
-  package interrupt controller which can route local I/O interrupt to interrupt lines
-  of cores.
+  This interrupt controller is found in the Loongson-3 family of chips and
+  Loongson-2K1000 chip, as the primary package interrupt controller which
+  can route local I/O interrupt to interrupt lines of cores.
 
 allOf:
   - $ref: /schemas/interrupt-controller.yaml#
@@ -22,9 +22,10 @@ properties:
     oneOf:
       - const: loongson,liointc-1.0
       - const: loongson,liointc-1.0a
+      - const: loongson,liointc-2.0
 
   reg:
-    maxItems: 1
+    maxItems: 3
 
   interrupt-controller: true
 
-- 
2.20.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help