[PATCH v4 5/5] mips: dts: Add support for Cisco SG220-26 switch
From: Bert Vermeulen <hidden>
Date: 2021-01-19 10:12:21
Also in:
linux-devicetree, lkml
Subsystem:
mips, the rest · Maintainers:
Thomas Bogendoerfer, Linus Torvalds
Signed-off-by: Bert Vermeulen <redacted> --- arch/mips/Kconfig | 10 ++++++++ arch/mips/boot/dts/realtek/Makefile | 2 ++ arch/mips/boot/dts/realtek/cisco_sg220-26.dts | 25 +++++++++++++++++++ 3 files changed, 37 insertions(+) create mode 100644 arch/mips/boot/dts/realtek/Makefile create mode 100644 arch/mips/boot/dts/realtek/cisco_sg220-26.dts
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0986d0c4405f..a398416842ca 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig@@ -1055,6 +1055,16 @@ config NLM_XLP_BOARD endchoice +if MACH_REALTEK_RTL +choice + prompt "Realtek RTL838x/RTL839x-based switch" + optional + + config DT_CISCO_SG220_26 + bool "Cisco SG220-26" +endchoice +endif + source "arch/mips/alchemy/Kconfig" source "arch/mips/ath25/Kconfig" source "arch/mips/ath79/Kconfig"
diff --git a/arch/mips/boot/dts/realtek/Makefile b/arch/mips/boot/dts/realtek/Makefile
new file mode 100644
index 000000000000..f0a3e5816767
--- /dev/null
+++ b/arch/mips/boot/dts/realtek/Makefile@@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_DT_CISCO_SG220_26) += cisco_sg220-26.dtb
diff --git a/arch/mips/boot/dts/realtek/cisco_sg220-26.dts b/arch/mips/boot/dts/realtek/cisco_sg220-26.dts
new file mode 100644
index 000000000000..1cdbb09297ef
--- /dev/null
+++ b/arch/mips/boot/dts/realtek/cisco_sg220-26.dts@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause + +/dts-v1/; + +#include "rtl83xx.dtsi" +#include "rtl838x.dtsi" + +/ { + model = "Cisco SG220-26"; + compatible = "cisco,sg220-26", "realtek,rtl8382-soc"; + + chosen { + stdout-path = "serial0:9600n8"; + bootargs = "earlycon console=ttyS0,9600"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; +}; + +&uart0 { + status = "okay"; +};
--
2.25.1