On Fri, Oct 14, 2016 at 11:25:55AM +0530, Rahul Bedarkar wrote:

Add support for Imagination Technologies' Marduk board which is based
on Pistachio SoC. It is also known as Creator Ci40. Marduk is legacy
name and will be there for decades.

Documentation for this board can be found on
https://docs.creatordev.io/ci40/

This patch adds initial support for board with following peripherals:

* PWM based heartbeat LED
* GPIO based buttons
* SPI NOR flash on SPI1
* UART0 and UART1
* SD card
* Ethernet
* USB
* PWM
* ADC
* I2C

Signed-off-by: Rahul Bedarkar <redacted>
---
Changes in v2:
  - Correct RAM size. It is 256MB instead of 128MB.
  - Rename nodes pwm_leds -> leds and gpio_keys -> keys (Suggested by Rob Herring)
  - Don't use '_' in node name for internal_dac_supply (Suggested by Rob Herring)
  - Add part name in compatible string for spi-nor (Suggested by Rob Herring)
---
 .../bindings/mips/img/pistachio-marduk.txt         |  10 ++
 MAINTAINERS                                        |   6 +
 arch/mips/boot/dts/img/Makefile                    |   9 ++
 arch/mips/boot/dts/img/pistachio_marduk.dts        | 163 +++++++++++++++++++++
 4 files changed, 188 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
 create mode 100644 arch/mips/boot/dts/img/Makefile
 create mode 100644 arch/mips/boot/dts/img/pistachio_marduk.dts

Acked-by: Rob Herring <robh@kernel.org>