On Thu, Feb 20, 2014 at 02:53:06PM +0100, Daniel Lezcano wrote:

On 02/20/2014 02:41 PM, Paul Burton wrote:

quoted

On Thu, Feb 20, 2014 at 02:35:18PM +0100, Daniel Lezcano wrote:

quoted

On 01/15/2014 02:55 PM, Paul Burton wrote:

quoted

Declaring this allows drivers which need to initialise each struct
cpuidle_device at initialisation time to make use of the structures
already defined in cpuidle.c, rather than having to wastefully define
their own.

Signed-off-by: Paul Burton <redacted>
Cc: Rafael J. Wysocki <redacted>
Cc: Daniel Lezcano <redacted>
Cc: linux-pm@vger.kernel.org
---
 include/linux/cpuidle.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 50fcbb0..bab4f33 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h

@@ -84,6 +84,7 @@ struct cpuidle_device {
 };

 DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
+DECLARE_PER_CPU(struct cpuidle_device, cpuidle_dev);

Nak. When a device is registered, it is assigned to the cpuidle_devices
pointer and the backend driver should use it.

Yes, but then if the driver needs to initialise the coupled_cpus mask
then it cannot do so until after the device has been registered. During
registration the cpuidle_coupled_register_device will then see the empty
coupled_cpus mask & do nothing. The only other ways around this would be
for the driver to define its own per-cpu struct cpuidle_device (which as
I state in the commit message seems wasteful when cpuidle already
defined them), or for cpuidle_coupled_register_device to be called later
after the driver had a chance to modify devices via the cpuidle_devices
pointers.

Yeah. I understand why you wanted to declare these cpu variables.

The mips cpuidle driver sounds like a bit particular. I believe I need some
clarification on the behavior of the hardware to understand correctly the
driver. Could you explain how the couples act vs the cpu ? And why
cpu_sibling is used instead of cpu_possible_mask ?

Sure. The CPUs that are coupled are actually VPEs (Virtual Processor
Elements) within a single core. They share the compute resource (ALUs
etc) of the core but have their own register state, ie. they're a form
of simultaneous multithreading.

Coherence within a MIPS Coherent Processing System is a property of the
core rather than of an individual VPE (since the VPEs within a core
share the same L1 caches). So for idle states which are non-coherent the
VPEs within the core are coupled. That covers all idle states beyond a
simple "wait" instruction - clock gating or powering down a core
requires it to become non-coherent first.

cpu_sibling_mask is already setup to indicate which CPUs (VPEs) are
within the same core as each other, which is why it is simply copied for
coupled_cpus.

Paul