[PATCH 1/2] DT: Add documentation for gpio-falcon
From: John Crispin <hidden>
Date: 2013-08-08 14:26:35
Also in:
linux-devicetree
Subsystem:
gpio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Linus Walleij, Bartosz Golaszewski, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Describe gpio-falcon binding. Signed-off-by: John Crispin <redacted> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-gpio@vger.kernel.org --- .../devicetree/bindings/gpio/gpio-falcon.txt | 25 ++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-falcon.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-falcon.txt b/Documentation/devicetree/bindings/gpio/gpio-falcon.txt
new file mode 100644
index 0000000..60bc6cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-falcon.txt@@ -0,0 +1,25 @@ +Lantiq Falon SoC GPIO controller bindings + +Required properties: +- compatible: + - "lantiq,falcon-gpio" for Falcon SoC controllers +- #gpio-cells : Should be two. + - first cell is the pin number + - second cell is used to specify optional parameters (unused) +- gpio-controller : Marks the device node as a GPIO controller +- reg : Physical base address and length of the controller's registers +- interrupt-parent: phandle to the IM device node that the irq is routed via +- interrupts : Specify the IM interrupt number +- lantiq,bank : The physical GPIO bank that this block is assiciated with + +Example: + + gpio0: gpio@810000 { + compatible = "lantiq,falcon-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x810000 0x80>; + interrupt-parent = <&icu0>; + interrupts = <44>; + lantiq,bank = <0>; + };
--
1.7.10.4