Re: Au1500 and TI PCI1510 cardbus

2007/3/20, Sergei Shtylyov [off-list ref]:

quoted

I think I'm beginning to make a lot of confusion. Is the problem that

the

quoted

PCI1510 must NOT be behind a bridge, or the problem is that PCI1510 acts

as

quoted

a bridge, so cardbus cards cannot work?

    The second.

Ok, at the risk of appearing totally dumb, I'll double check.. If the second
ic correct, PCI1510 is a bridce, a cardbus card cannot work.


    You can see yourself that PCI1510 is a bridge (Cardbus-to-PCI bridge is

largely the same as PCI-to-PCI bridge).

Ok.

So it seems that the 3Com card is behind a bus. Should this work? From
what

quoted

I've understood, it should now work..

    Think again. :-)

Ok, that's a typo :-) It should NOT work. Is this better?

   Sounds like what's been told in the errata 32.


It seems that  Au1500 slowly faded into the shadows. Now it is owned by
Raza, but there is no sign of an errata document, perhaps I've lost the
magic moment when a lot of documentation was available.

But still, the question remains: how can Takeyoshi's "Ricoh CardBus Bridge"
work with a cardbus card if bridges cannot work with Au1500's PCI?

Scrub scrub..