Re: Support for physical memory above 0x20000000

On Tue, Jan 08, 2002 at 11:07:53AM -0800, Kevin Paul Herbert wrote:

I'm working with a somewhat dated kernel (2.4.2+patches) and have 
discovered that there are problems with physical memory that does not 
map into KSEG0/KSEG1. I looked over the list archives (manually, I 
couldn't find a search interface) and it appears that this is still 
the case for current kernels (at least as of a note from last summer, 
the last time the issue seems to have come up.)

Obviously, phys_to_virt() is going to be a problem but besides this 
I'm wondering what anybody may have done to support physical memory 
that is not always mapped into the virtual address space, so that I 
don't have to reinvent the wheel.

When I tell the kernel about the memory above 0x20000000, userland 
fails to start; the kernel gets as far as execve()'ing init, but 
nothing happens (interrupts are enabled; I get echo on the console, 
but nothing from userland).

Correct.  There are two ways to solve this problem.  For the 32-bit kernel
I've got a highmem patch and the 64-bit kernel memory limits are the
hardware's memory limits.  I'll post the highmem patch soon.  I was
planning to have it ready by now but a flu sent me to bed instead ...

  Ralf