Thread (16 messages) 16 messages, 8 authors, 2021-01-22
STALE1959d
Revisions (2)
  1. v1 current
  2. v2 [diff vs current]

[PATCH net-next 1/2] dt-bindings: net: dsa: add MT7530 GPIO controller binding

From: DENG Qingfang <dqfext@gmail.com>
Date: 2021-01-11 05:46:10
Also in: linux-arm-kernel, linux-devicetree, lkml, netdev
Subsystem: networking drivers, networking [dsa], open firmware and flattened device tree bindings, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Add device tree binding to support MT7530 GPIO controller.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
 Documentation/devicetree/bindings/net/dsa/mt7530.txt | 6 ++++++
 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index 560369efad6c..de04626a8e9d 100644
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -76,6 +76,12 @@ phy-mode must be set, see also example 2 below!
  * mt7621: phy-mode = "rgmii-txid";
  * mt7623: phy-mode = "rgmii";
 
+Optional properties:
+
+- gpio-controller: Boolean; if defined, MT7530's LED controller will run on
+	GPIO mode.
+- #gpio-cells: Must be 2 if gpio-controller is defined.
+
 See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required, optional properties and how the integrated switch subnodes must
 be specified.
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help