[PATCH net-next v3 2/2] net: ethernet: mediatek: modify GDM to send packets to the PDMA for RX
From: Nelson Chang <hidden>
Date: 2016-08-25 02:26:31
Also in:
netdev
Subsystem:
mediatek ethernet driver, networking drivers, the rest · Maintainers:
Felix Fietkau, Lorenzo Bianconi, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Because we change to use the PDMA as the Ethernet RX DMA engine, the patch modifies to set GDM to send packets to PDMA for RX. Signed-off-by: Nelson Chang <nelson.chang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 ++-- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 0 2 files changed, 2 insertions(+), 2 deletions(-) mode change 100755 => 100644 drivers/net/ethernet/mediatek/mtk_eth_soc.c mode change 100755 => 100644 drivers/net/ethernet/mediatek/mtk_eth_soc.h
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
old mode 100755
new mode 100644
index cbeb793..c47fef4
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c@@ -1473,9 +1473,9 @@ static int __init mtk_hw_init(struct mtk_eth *eth) for (i = 0; i < 2; i++) { u32 val = mtk_r32(eth, MTK_GDMA_FWD_CFG(i)); - /* setup the forward port to send frame to QDMA */ + /* setup the forward port to send frame to PDMA */ val &= ~0xffff; - val |= 0x5555; + val |= 0x0000; /* Enable RX checksum */ val |= MTK_GDMA_ICS_EN | MTK_GDMA_TCS_EN | MTK_GDMA_UCS_EN;
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
old mode 100755
new mode 100644
--
1.9.1