Re: omap3isp: wrong image after resizer with mt9v034 sensor

Hi Laurent,

2012/9/24 Laurent Pinchart [off-list ref]:

Hi Enric,

On Monday 24 September 2012 10:33:42 Enric Balletbò i Serra wrote:

quoted

Hi everybody,

I'm trying to add support for MT9V034 Aptina image sensor to current
mainline, as a base of my current work I start using the latest
omap3isp-next branch from Laurent's git tree [1]. The MT9V034 image
sensor is very similar to MT9V032 sensor, so I modified current driver
to accept MT9V034 sensor adding the chip ID. The driver recognizes the
sensor and I'm able to capture some frames.

I started capturing directly frames using the pipeline Sensor -> CCDC

    ./media-ctl -r
    ./media-ctl -l '"mt9v032 3-005c":0->"OMAP3 ISP CCDC":0[1]'
    ./media-ctl -l '"OMAP3 ISP CCDC":1->"OMAP3 ISP CCDC output":0[1]'
    ./media-ctl -f '"mt9v032 3-005c":0 [SGRBG10 752x480]'
    ./media-ctl -f '"OMAP3 ISP CCDC":1 [SGRBG10 752x480]'

    # Test pattern
    ./yavta --set-control '0x00981901 1' /dev/v4l-subdev8

    # ./yavta -p -f SGRBG10 -s 752x480 -n 4 --capture=3 /dev/video2
--file=img-#.bin

To convert to jpg I used bayer2rgb [2] program executing following command,

    $ convert -size 752x480  GRBG_BAYER:./img-000000.bin img-000000.jpg

And the result image looks like this

    http://downloads.isee.biz/pub/files/patterns/img-from-sensor.jpg

Seems good, so I tried to use following pipeline Sensor -> CCDC ->
Preview -> Resizer

    ./media-ctl -r
    ./media-ctl -l '"mt9v032 3-005c":0->"OMAP3 ISP CCDC":0[1]'
    ./media-ctl -l '"OMAP3 ISP CCDC":2->"OMAP3 ISP preview":0[1]'
    ./media-ctl -l '"OMAP3 ISP preview":1->"OMAP3 ISP resizer":0[1]'
    ./media-ctl -l '"OMAP3 ISP resizer":1->"OMAP3 ISP resizer output":0[1]'

    ./media-ctl -V '"mt9v032 3-005c":0[SGRBG10 752x480]'
    ./media-ctl -V  '"OMAP3 ISP CCDC":0 [SGRBG10 752x480]'
    ./media-ctl -V  '"OMAP3 ISP CCDC":2 [SGRBG10 752x480]'
    ./media-ctl -V  '"OMAP3 ISP preview":1 [UYVY 752x480]'
    ./media-ctl -V  '"OMAP3 ISP resizer":1 [UYVY 752x480]'

    # Set Test pattern

    ./yavta --set-control '0x00981901 1' /dev/v4l-subdev8

    ./yavta -f UYVY -s 752x480 --capture=3 --file=img-#.uyvy /dev/video6

I used 'convert' program to pass from UYVY to jpg,

    $ convert -size 752x480 img-000000.uyvy img-000000.jpg

and the result image looks like this

    http://downloads.isee.biz/pub/files/patterns/img-from-resizer.jpg

As you can see, the image is wrong and I'm not sure if the problem is
from the sensor, from the previewer, from the resizer or from my
conversion. Anyone have idea where should I look ? Or which is the
source of the problem ?

Could you please post the output of all the above media-ctl and yavta runs, as
well as the captured raw binary frame ?

Of course,

The log configuring the pipeline Sensor -> CCDC is
    http://pastebin.com/WX8ex5x2
and the raw image can be found
    http://downloads.isee.biz/pub/files/patterns/img-000000.bin


And the log configuring the pipeline Sensor -> CCDC -> Previewer -> Resizer is
    http://pastebin.com/wh5ZJwne
and the raw image can be found
    http://downloads.isee.biz/pub/files/patterns/img-000000.uyvy

quoted

[1] http://git.linuxtv.org/pinchartl/media.git/shortlog/refs/heads/omap3isp-
omap3isp-next
[2] https://github.com/jdthomas/bayer2rgb

--
Regards,

Laurent Pinchart