[PATCH 13/22] PCI: rockchip: Use SET_PCI_ERROR_RESPONSE() when device not found
From: Naveen Naidu <hidden>
Date: 2021-10-11 18:03:54
Also in:
linux-arm-kernel, linux-pci, linux-rockchip, lkml
Subsystem:
arm/rockchip soc support, pci native host bridge and endpoint drivers, pci subsystem, pcie driver for rockchip, the rest · Maintainers:
Heiko Stuebner, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Shawn Lin, Linus Torvalds
An MMIO read from a PCI device that doesn't exist or doesn't respond causes a PCI error. There's no real data to return to satisfy the CPU read, so most hardware fabricates ~0 data. Use SET_PCI_ERROR_RESPONSE() to set the error response, when a faulty read occurs. This helps unify PCI error response checking and make error check consistent and easier to find. Compile tested only. Signed-off-by: Naveen Naidu <redacted> --- drivers/pci/controller/pcie-rockchip-host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pcie-rockchip-host.c b/drivers/pci/controller/pcie-rockchip-host.c
index c52316d0bfd2..f5d718700d59 100644
--- a/drivers/pci/controller/pcie-rockchip-host.c
+++ b/drivers/pci/controller/pcie-rockchip-host.c@@ -222,7 +222,7 @@ static int rockchip_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, struct rockchip_pcie *rockchip = bus->sysdata; if (!rockchip_pcie_valid_device(rockchip, bus, PCI_SLOT(devfn))) { - *val = 0xffffffff; + SET_PCI_ERROR_RESPONSE(val); return PCIBIOS_DEVICE_NOT_FOUND; }
--
2.25.1
_______________________________________________
Linux-kernel-mentees mailing list
Linux-kernel-mentees@lists.linuxfoundation.org
https://lists.linuxfoundation.org/mailman/listinfo/linux-kernel-mentees