[PATCH v2 06/15] HID: ft260: i2c: reduce bus-error message severity

From
Michael Zaidman <michael.zaidman@gmail.com>
Date
2026-10-30 22:37:12
Also in
linux-gpio, linux-i2c, linux-serial, lkml
Reply to
Michael Zaidman, 2026-10-30
The driver logged errors when the FT260 reported an I2C bus error or when
ft260_i2c_write / ft260_smbus_write failed after such a status. That was
meant to flag unexpected failures, but bus scans (i2cdetect, HWMON
discovery, transceiver monitoring, and similar) hit missing devices
routinely and should not spam dmesg with either:

  i2c bus error: %#02x
  ft260_i2c_write: failed with -5

Keep returning -EIO, but print those via ft260_dbg. Still use hid_err in
ft260_hid_output_report_check_status for actual HID/USB transport
failures, which are genuine errors.

Drop the extra __func__ from the write-path ft260_dbg calls; the helper
already prints the function name (reported by Sashiko).

Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>

---
v2: do not print __func__ twice through ft260_dbg (reported by Sashiko).
---
 drivers/hid/hid-ft260.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/hid/hid-ft260.c b/drivers/hid/hid-ft260.c
index d2c5c9ed7927..6f8d72938702 100644
--- a/drivers/hid/hid-ft260.c
+++ b/drivers/hid/hid-ft260.c
@@ -575,7 +575,7 @@ static int ft260_xfer_status(struct ft260_device *dev, u8 bus_busy)
 	 * to 1, bit 1 is also set to 1.
 	 */
 	if (report.bus_status & FT260_I2C_STATUS_ERROR) {
-		hid_err(hdev, "i2c bus error: %#02x\n", report.bus_status);
+		ft260_dbg("i2c bus error: %#02x\n", report.bus_status);
 		return -EIO;
 	}
 
@@ -609,6 +609,7 @@ static int ft260_hid_output_report_check_status(struct ft260_device *dev,
 
 	ret = ft260_hid_output_report(hdev, data, len);
 	if (ret < 0) {
+		hid_err(hdev, "%s: failed with %d\n", __func__, ret);
 		ft260_i2c_reset(hdev);
 		return ret;
 	}
@@ -648,7 +649,6 @@ static int ft260_i2c_write(struct ft260_device *dev, u8 addr, u8 *data,
 			   int len, u8 flag)
 {
 	int ret, wr_len, idx = 0;
-	struct hid_device *hdev = dev->hdev;
 	struct ft260_i2c_write_request_report *rep =
 		(struct ft260_i2c_write_request_report *)dev->i2c_wr_buf;
 
@@ -679,7 +679,7 @@ static int ft260_i2c_write(struct ft260_device *dev, u8 addr, u8 *data,
 		ret = ft260_hid_output_report_check_status(dev, (u8 *)rep,
 							   wr_len + 4);
 		if (ret < 0) {
-			hid_err(hdev, "%s: failed with %d\n", __func__, ret);
+			ft260_dbg("failed with %d\n", ret);
 			return ret;
 		}
 
@@ -695,7 +695,7 @@ static int ft260_i2c_write(struct ft260_device *dev, u8 addr, u8 *data,
 static int ft260_smbus_write(struct ft260_device *dev, u8 addr, u8 cmd,
 			     u8 *data, u8 data_len, u8 flag)
 {
-	int ret = 0;
+	int ret;
 	int len = 4;
 
 	struct ft260_i2c_write_request_report *rep =
@@ -720,7 +720,7 @@ static int ft260_smbus_write(struct ft260_device *dev, u8 addr, u8 cmd,
 
 	ret = ft260_hid_output_report_check_status(dev, (u8 *)rep, len);
 	if (ret < 0)
-		hid_err(dev->hdev, "%s: failed with %d\n", __func__, ret);
+		ft260_dbg("failed with %d\n", ret);
 
 	return ret;
 }
-- 
2.43.0
Thread (27 messages) 27 messages, 3 authors, last reply 10d ago
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help