[PATCH v5 15/37] ARM: dts: qcom: msm8660: move PMIC interrupts to the board files
From: Dmitry Baryshkov <hidden>
Date: 2023-08-27 13:27:00
Also in:
linux-arm-msm, linux-devicetree, linux-iio, linux-leds
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Signed-off-by: Dmitry Baryshkov <redacted> --- arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts | 4 ++++ arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts | 4 ++++ arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 2 -- 3 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 48fd1a1feea3..e4261d729d35 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts@@ -273,6 +273,10 @@ kxsd9@18 { }; }; +&pm8058 { + interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8058_gpio { dragon_ethernet_gpios: ethernet-state { pinconf {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
index 86fbb6dfdc2a..a5441aecd637 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts@@ -34,6 +34,10 @@ &gsbi12_serial { status = "okay"; }; +&pm8058 { + interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8058_keypad { linux,keymap = < MATRIX_KEY(0, 0, KEY_FN_F1)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 9217ced108c4..84b0366792d4 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi@@ -341,8 +341,6 @@ ssbi@500000 { pm8058: pmic { compatible = "qcom,pm8058"; - interrupt-parent = <&tlmm>; - interrupts = <88 8>; #interrupt-cells = <2>; interrupt-controller; #address-cells = <1>;
--
2.39.2