[PATCH v5 14/37] ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files
From: Dmitry Baryshkov <hidden>
Date: 2023-08-27 13:27:00
Also in:
linux-arm-msm, linux-devicetree, linux-iio, linux-leds
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Signed-off-by: Dmitry Baryshkov <redacted> --- arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi | 4 ++++ arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi | 1 - 2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index dac3aa793f71..b782ff0d16cd 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi@@ -76,6 +76,10 @@ reset-out-pins { }; }; +&pm8018 { + interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; +}; + &pm8018_gpio { usb_vbus_5v_pins: usb-vbus-5v-state { pins = "gpio4";
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index c4cfbdbcdf14..373d9425b8bd 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi@@ -265,7 +265,6 @@ qcom,ssbi@500000 { pm8018: pmic { compatible = "qcom,pm8018", "qcom,pm8921"; - interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; #address-cells = <1>;
--
2.39.2