Thread (14 messages) 14 messages, 5 authors, 2019-06-19
STALE2539d
Revisions (3)
  1. v6 current
  2. v7 [diff vs current]
  3. v8 [diff vs current]

[PATCH v6 4/5] arm64: dts: qcom: Add HP Envy x2

From: Jeffrey Hugo <hidden>
Date: 2019-06-13 17:16:53
Also in: linux-arm-msm, linux-devicetree, lkml
Subsystem: arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers: Bjorn Andersson, Konrad Dybcio, Linus Torvalds

This adds the initial DT for the HP Envy x2 laptop.  Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.

Signed-off-by: Jeffrey Hugo <redacted>
---
 arch/arm64/boot/dts/qcom/Makefile             |  1 +
 .../boot/dts/qcom/msm8998-hp-envy-x2.dts      | 30 +++++++++++++++++++
 2 files changed, 31 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index c3e4307bcbd4..76436f33a013 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts
new file mode 100644
index 000000000000..24073127091f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-clamshell.dtsi"
+
+/ {
+	model = "HP Envy x2";
+	compatible = "hp,envy-x2", "qcom,msm8998";
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		interrupt-parent = <&tlmm>;
+		interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x3a>;
+		hid-descr-addr = <0x0001>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchpad>;
+	};
+};
+
+&sdhc2 {
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
+};
-- 
2.17.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help