[PATCH v2 3/8] dt-bindings: input: touchscreen: sx8654: add compatible models
STALE2864d
From: Richard Leitner <richard.leitner@skidata.com>
Date: 2018-10-17 16:08:20
Also in:
linux-devicetree, lkml
Subsystem:
input (keyboard, mouse, joystick, touchscreen) drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v2 of 3 in this series.
Revisions (3)
- v1 [diff vs current]
- v2 current
- v2 [diff vs current]
As the sx865[456] share the same datasheet and differ only in the presence of a "capacitive proximity detection circuit" and a "haptics motor driver for LRA/ERM" add them to the compatbiles. As the driver doesn't implement these features it should be no problem. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> --- Documentation/devicetree/bindings/input/touchscreen/sx8654.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index ca521d8f7d65..a538678424dd 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt@@ -1,7 +1,10 @@ * Semtech SX8654 I2C Touchscreen Controller Required properties: -- compatible: must be "semtech,sx8654" +- compatible: must be one of the following, depending on the model: + "semtech,sx8654" + "semtech,sx8655" + "semtech,sx8656" - reg: i2c slave address - interrupts: touch controller interrupt
--
2.11.0