[PATCH v2 1/8] dt-bindings: input: touchscreen: sx8654: add reset-gpio property
flat view
STALE2866d
From: Richard Leitner <richard.leitner@skidata.com>
Date: 2018-10-17 16:07:45
Also in:
linux-devicetree, lkml
Subsystem:
input (keyboard, mouse, joystick, touchscreen) drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v2 of 3 in this series.
Revisions (3)
- v1 [diff vs current]
- v2 current
- v2 [diff vs current]
Document the reset-gpio property for the sx8654 touchscreen controller driver. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> --- Documentation/devicetree/bindings/input/touchscreen/sx8654.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index 4886c4aa2906..ca521d8f7d65 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt@@ -5,6 +5,9 @@ Required properties: - reg: i2c slave address - interrupts: touch controller interrupt +Optional properties: + - reset-gpios: GPIO specification for the NRST input + Example: sx8654@48 {
@@ -12,4 +15,5 @@ Example: reg = <0x48>; interrupt-parent = <&gpio6>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; };
--
2.11.0