Hi Nikolaus,

On Wed, Dec 28, 2016 at 03:53:16PM +0100, H. Nikolaus Schaller wrote:

commit b98abe52fa8e ("Input: add common DT binding for touchscreens")
introduced common DT bindings for touchscreens [1] and a helper function to
parse the DT.

commit ed7c9870c9bc ("Input: of_touchscreen - add support for inverted / swapped axes")
added another helper for parsing axis inversion and swapping
and applying them to x and y coordinates.

Both helpers have been integrated to accommodate any orientation of the
touch panel in relation to the LCD.

A new feature is to introduce scaling the min/max ADC values to the screen
size.

This makes it possible to pre-calibrate the touch so that is (almost)
exactly matches the LCD pixel coordinates it is glued onto. This allows to
well enough operate the touch before a user space calibration step can
improve the precision.

I question whether doing scaling in kernel is really right solution.

Why do you want this? If your touch resolution is lower than your screen
then it might be useful, but if it is lower then you are losing data
that can be very helpful for gesture recognition, and I hope you design
your userspace so it can handle not only "bad" hardware, but "good" as
well. And even with "bad" there are a lot of tricks that can be done to
get "better" touch position in userspace.

Please note that the old ti,fuzz properties have been removed since they
are replaced by the common bindings touchscreen-fuzz-x/y/z.

Finally, calculate_pressure has been renamed to calculate_resistance
because that is what it is doing.

That is not what your patch does though. In the presence of
"ti,report-resistance" parameter you start reporting resistance through
ABS_PRESSURE without any indication to the userspace that meaning of
event changed. This is no better if than reporting it through ABS_X. You
should not override meaning of input events.

Thanks.

-- 
Dmitry