Re: [PATCH 4/5] mfd: qcom-rpm: Add support for pm8018 RPM Regulator

On 06/22/2016 07:23 AM, Bjorn Andersson wrote:

On Fri 17 Jun 03:22 PDT 2016, Neil Armstrong wrote:

[..]

quoted

diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c

[..]

quoted

+
+static const struct qcom_rpm_data mdm9615_template = {
+	.version = 3,
+	.resource_table = mdm9615_rpm_resource_table,
+	.n_resources = ARRAY_SIZE(mdm9615_rpm_resource_table),
+};

Please see:
https://patchwork.kernel.org/patch/9177159/

You should set the new .sel_size to 4 here, please either rebase ontop
of Linus patch or send an update after both are merged.

quoted

+
 static const struct of_device_id qcom_rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
 	{ .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
 	{ .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
 	{ .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
+	{ .compatible = "qcom,rpm-mdm9615", .data = &mdm9615_template },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);

diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
index 13a9d4b..db85912 100644
--- a/include/dt-bindings/mfd/qcom-rpm.h
+++ b/include/dt-bindings/mfd/qcom-rpm.h

@@ -148,6 +148,29 @@
 #define QCOM_RPM_SMB208_S2a			138
 #define QCOM_RPM_SMB208_S2b			139
 
+#define QCOM_RPM_PM8018_SMPS1			200

These numbers are a logical identifier and as such you shouldn't skip
140-199.

quoted

+#define QCOM_RPM_PM8018_SMPS2			201
+#define QCOM_RPM_PM8018_SMPS3			202
+#define QCOM_RPM_PM8018_SMPS4			203
+#define QCOM_RPM_PM8018_SMPS5			204
+#define QCOM_RPM_PM8018_LDO1			205
+#define QCOM_RPM_PM8018_LDO2			206
+#define QCOM_RPM_PM8018_LDO3			207
+#define QCOM_RPM_PM8018_LDO4			208
+#define QCOM_RPM_PM8018_LDO5			209
+#define QCOM_RPM_PM8018_LDO6			210
+#define QCOM_RPM_PM8018_LDO7			211
+#define QCOM_RPM_PM8018_LDO8			212
+#define QCOM_RPM_PM8018_LDO9			213
+#define QCOM_RPM_PM8018_LDO10			214
+#define QCOM_RPM_PM8018_LDO11			215
+#define QCOM_RPM_PM8018_LDO12			216
+#define QCOM_RPM_PM8018_LDO13			217
+#define QCOM_RPM_PM8018_LDO14			218
+#define QCOM_RPM_PM8018_LVS1			219
+#define QCOM_RPM_NCP				220

We already have PM8921_NCP and PM8058_NCP, so better make this
QCOM_RPM_PM8018_NCP for consistency.

quoted

+#define QCOM_RPM_VOLTAGE_CORNER			221
+

Other then these details
Acked-by: Bjorn Andersson <redacted>

Regards,
Bjorn

Thanks,

I rebased on Linus two patches ("fix offset error for msm8660" and "parametrize also ack selector size")

I suppose I should also drop the QCOM_RPM_VOLTAGE_CORNER rpm entry also ?

Neil

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.