Re: [PATCH 2/9] Input: atmel_mxt_ts - use deep sleep mode when stopped

On Mon, Aug 03, 2015 at 04:23:10PM +0100, Nick Dyer wrote:

The hardcoded 0x83 CTRL setting overrides other settings in that byte,
enabling extra reporting that may not be useful on a particular platform.

Implement improved suspend mechanism via deep sleep. By writing zero to
both the active and idle cycle times the maXTouch device can be put into a
deep sleep mode, using minimal power. It is necessary to issue a calibrate
command after the chip has spent any time in deep sleep, however a soft
reset is unnecessary.

Use the old method on Chromebook Pixel via platform data option.

This patch also deals with the situation where the power configuration is
zero on probe, which would mean that the device never wakes up to execute
commands.

After a config download, the T7 power configuration may have changed so it
is necessary to re-read it.

Signed-off-by: Nick Dyer <redacted>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <redacted>
---
 .../devicetree/bindings/input/atmel,maxtouch.txt   |   5 +

Since the T9 code is for compatibility with old Pixel only I do not
think we should be adding it to device tree binding, at least not at the
moment. I cut the device tree parsing out and default to deep sleep on
DT-based systems.

Thanks.

-- 
Dmitry