[PATCH 7/9] Input: atmel_mxt_ts - disable interrupt for 50ms after reset
From: Nick Dyer <hidden>
Date: 2015-08-03 15:32:47
Subsystem:
atmel maxtouch driver, input (keyboard, mouse, joystick, touchscreen) drivers, the rest · Maintainers:
Nick Dyer, Dmitry Torokhov, Linus Torvalds
The CHG/interrupt line is momentarily set (approximately 100 ms) as an input after power-up or reset for diagnostic purposes. This may cause spurious interrupts, so disable interrupt handler during this period. Signed-off-by: Nick Dyer <redacted> --- drivers/input/touchscreen/atmel_mxt_ts.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 7c14faa..ff48d45 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c@@ -1098,7 +1098,9 @@ static int mxt_soft_reset(struct mxt_data *data) struct device *dev = &data->client->dev; int ret = 0; - dev_info(dev, "Resetting chip\n"); + dev_info(dev, "Resetting device\n"); + + disable_irq(data->irq); reinit_completion(&data->reset_completion);
@@ -1106,6 +1108,11 @@ static int mxt_soft_reset(struct mxt_data *data) if (ret) return ret; + /* Ignore CHG line for 100ms after reset */ + msleep(100); + + enable_irq(data->irq); + ret = mxt_wait_for_completion(data, &data->reset_completion, MXT_RESET_TIMEOUT); if (ret)
--
2.4.6