On Thu, May 8, 2014 at 4:53 AM, Maxime Ripard
[off-list ref] wrote:

<snip>

What I mean is that no information is still better than wrong
informations. If you don't have the schematics, then don't do anything
on this boards. Hopefully, someone with more infos on this will know
what to do.

I partially agree here. Not specifying the voltage range for the
regulators but only keeping them always-on from a practical point of
view means that we do nothing with those regulators (see also
https://www.mail-archive.com/linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg09532.html
)

Moreover, I have the feeling that you just copy pasted all the
informations on this patch. The first example I'm seeing is the
cubieboard, for which we do have the schematics, and this patch says
that ldo4 is used for HDMI, and that is required to stays always on,
while LDO4 doesn't seem to be used at all, and that HDMI takes
directly its input source from DC-5V.

The names for the regulators are taken from the original Allwinner
driver and (of course) they can have nothing to do with the function
they have in the board. I agree that this could be misleading so I'll
change them with more general names. Concerning LDO4 that is always
on, it was off until this v4, but I changed it back to have one common
DT representation among all the boards.

I guess you need some more refining on this patch.

Ok, I'll submit a v6 only for this patch.

Thanks,

-- 
Carlo Caione