Hi,

Simon Budig wrote:

On 20/03/14 12:40, Lothar Waßmann wrote:

quoted

The FT5x06 datasheet lists 3 variants for different panel sizes.
I'll add distinct compatible strings for those chips, though their SW
interface is (currently) identical:
|Required properties:
| - compatible:  "edt,edt-ft5206", "edt,edt-ft5x06"
|           or:  "edt,edt-ft5306", "edt,edt-ft5x06"
|           or:  "edt,edt-ft5406", "edt,edt-ft5x06"

Please note that the M09 variants of the polytouch family will use the
same chips, but a different sw protocol (see Patch 5/5).

The firmware version can be detected by SW, thus there is no need to
distinguish it via DT.

I don't know anything about the naming scheme used in the device tree,
but I am not sure if the chip-ID is actually useful here.

Since the chip variants handle different panel sizes, it might be useful
to be able to distinguish them.


Lothar Waßmann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info@karo-electronics.de
___________________________________________________________